/*
 * bsp_DLT_Log.c
 *
 *  Created on: Aug 8, 2024
 *      Author: akeguo
 */

#include "bsp_DLT_Log.h"

uint32_t GetSysTime(void);
void DltInjectDataRcvd(uint32_t AppId, uint32_t ConId, uint32_t ServId,
        uint8_t *Data, uint16_t Size);
void DLT_LowLevelReceiveDmaToIdle(uint8_t *rxBuf, uint16_t size);
void DLT_DataReceiveEndCallback(uint8_t *rxBuf, uint16_t Size);
void DLT_DataTransmit(uint8_t *DltLogData, uint8_t Size);

struct UARTHandler *dLT_Log_UART_Handler;

typedef enum _send_out_port
{
	udp = 0, serialport = 1, tcp = 3,

} send_out_port;

char send_out_is_udp_or_serial_port = 0;

void dLT_Log_intialize(struct UARTHandler *Handler)
{

	dLT_Log_UART_Handler = Handler;
	dLT_Log_UART_Handler->Wait_time = 40;
	Handler->dispacherController->Dispacher_Enable = 1;
	//log_info("angle_encoder_intialize");
	dLT_Log_UART_Handler->UART_Decode = DLT_DataReceiveEndCallback;

	/*Register Low Level Transmit/Receive functions for DLTuc Library*/
	DLTuc_RegisterTransmitSerialDataFunction(DLT_DataTransmit);
	DLTuc_RegisterReceiveSerialDataFunction(DLT_LowLevelReceiveDmaToIdle);

	DLTuc_RegisterGetTimeStampMsCallback(GetSysTime); /*Register GetSysTime function*/
	/*The function "GetSysTime" must return the time in ms*/

	DLTuc_RegisterInjectionDataReceivedCb(DltInjectDataRcvd);
	send_out_is_udp_or_serial_port = serialport;
}
//dlt log 日志配置 默认为udp发送

/*This CallBack was registered in main function using function: DLTuc_RegisterTransmitSerialDataFunction*/
void DLT_DataTransmit(uint8_t *DltLogData, uint8_t Size)
{

	if (send_out_is_udp_or_serial_port == udp)
	{
		//udp_dlt_send_back(DltLogData, Size);
	}
	else if (send_out_is_udp_or_serial_port == serialport)
	{
		dLT_Log_UART_Handler->AddSendList(dLT_Log_UART_Handler, DltLogData,
		        Size, 100, NULL);
	}
	else if (send_out_is_udp_or_serial_port == tcp)
	{
		//tcp_send_to_all_clients(DltLogData, Size);//
		//tcp_add_sendList(DltLogData,Size);
	}

	DLTuc_MessageTransmitDone();

}
/*CallBacks used by ucDltLibrary section end..*/

void DLT_DataReceiveEndCallback(uint8_t *rxBuf, uint16_t Size)
{
	if (Size == 3)
	{
		if (rxBuf[2])
		{
			DLT_LOG_ENABLE_LEVEL = 7;
		}
		else
		{
			DLT_LOG_ENABLE_LEVEL = 0;
		}
	}
	DLTuc_RawDataReceiveDone(Size);
	/*
	 *In case of STM32 HAL lib, you have to subsitute this function using:
	 *void HAL_UARTEx_RxEventCallback(UART_HandleTypeDef *huart, uint16_t Size)
	 */
}
//HAL_UARTEx_RxEventCallback
void DLT_LowLevelReceiveDmaToIdle(uint8_t *rxBuf, uint16_t Size)
{

	memcpy(rxBuf, dLT_Log_UART_Handler->Rx_Buf, Size);

}

void DltInjectDataRcvd(uint32_t AppId, uint32_t ConId, uint32_t ServId,
        uint8_t *Data, uint16_t Size)
{
	LOG("RecInjectionData: %s, ServId: %d Size: %d", Data, ServId, Size)

}

uint32_t GetSysTime(void)
{
	return HAL_GetTick();
}