You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
376 lines
14 KiB
376 lines
14 KiB
|
|
|
|
#ifndef __BSP_MB_HOST_H__
|
|
#define __BSP_MB_HOST_H__
|
|
|
|
/* 包含头文件 ----------------------------------------------------------------*/
|
|
|
|
/* 类型定义 ------------------------------------------------------------------*/
|
|
|
|
/* 宏定义 --------------------------------------------------------------------*/
|
|
#define MB_SLAVEADDR 0x0001 //从机地址
|
|
#define MB_REG_ADDR 0 //寄存器地址（离散、线圈）
|
|
#define HoldingReg 0 //保持寄存器
|
|
#define InputRegReg 0x0020 //输入寄存器
|
|
#include "bsp_include.h"
|
|
#include "BSP/bsp_UART.h"
|
|
|
|
/* 扩展变量 ------------------------------------------------------------------*/
|
|
typedef struct
|
|
{
|
|
|
|
uint16_t DATA_01H;
|
|
uint16_t DATA_02H;
|
|
uint16_t DATA_03H;
|
|
|
|
uint16_t DATA_04H;
|
|
uint16_t DATA_05H;
|
|
uint16_t DATA_06H;
|
|
uint8_t DATA_10H[64];
|
|
|
|
}MB_REG_DATA;
|
|
|
|
//;
|
|
extern uint8_t MB_rx_flag;
|
|
extern uint16_t Read_Reg_Num;
|
|
|
|
/* 函数声明 ------------------------------------------------------------------*/
|
|
uint16_t MB_CRC16(uint8_t *pushMsg,uint8_t usDataLen);
|
|
void MB_ReadCoil_01H(struct UARTHandler *uartHandler,uint8_t _addr, uint16_t _reg, uint16_t _num);
|
|
void MB_WriteCoil_05H(struct UARTHandler *uartHandler,uint8_t _addr, uint16_t _reg, uint16_t _num);
|
|
void MB_ReadInput_02H(struct UARTHandler *uartHandler,uint8_t _addr, uint16_t _reg, uint16_t _num);
|
|
void MB_ReadHoldingReg_03H(struct UARTHandler *uartHandler,uint8_t _addr, uint16_t _reg, uint16_t _num);
|
|
void MB_ReadInputReg_04H(struct UARTHandler *uartHandler,uint8_t _addr, uint16_t _reg, uint16_t _num);
|
|
void MB_WriteHoldingReg_06H(struct UARTHandler *uartHandler,uint8_t _addr, uint16_t _reg, uint16_t _data);
|
|
void MB_WriteNumHoldingReg_10H(struct UARTHandler *uartHandler,uint8_t _addr, uint16_t _reg, uint16_t _num,uint8_t *_databuf);
|
|
|
|
#endif /* __BSP_MB_HOST_H__ */
|
|
|
|
/******************* (C) COPYRIGHT 2015-2020 硬石嵌入式开发团队 *****END OF FILE****/
|
|
|
|
|
|
|
|
#include "bsp_MB_host.h"
|
|
#include "stdio.h"
|
|
#include "BSP/bsp_UART.h"
|
|
|
|
uint16_t Receive_Data_Result[10][100];
|
|
|
|
__IO uint8_t Rx_Buf[256]; // 接收缓存,最大256字节
|
|
__IO uint8_t Tx_Buf[256]; // 发送缓存,最大256字节
|
|
__IO uint8_t tmp_Rx_Buf; // 临时接收缓存
|
|
__IO uint16_t RxCount = 0; // 接收字符计数
|
|
|
|
uint8_t MB_rx_flag=0;
|
|
uint16_t Read_Reg_Num;
|
|
uint8_t Read_Slave_ID=0;
|
|
uint16_t Read_Start_Reg_Num;
|
|
/* 私有类型定义 --------------------------------------------------------------*/
|
|
/* 私有宏定义 ----------------------------------------------------------------*/
|
|
/* 私有变量 ------------------------------------------------------------------*/
|
|
|
|
// CRC 高位字节值表
|
|
static const uint8_t auchCRCHi[] = {
|
|
0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41, 0x01, 0xC0,
|
|
0x80, 0x41, 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41,
|
|
0x00, 0xC1, 0x81, 0x40, 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0,
|
|
0x80, 0x41, 0x01, 0xC0, 0x80, 0x41, 0x00, 0xC1, 0x81, 0x40,
|
|
0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41, 0x00, 0xC1,
|
|
0x81, 0x40, 0x01, 0xC0, 0x80, 0x41, 0x01, 0xC0, 0x80, 0x41,
|
|
0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41, 0x00, 0xC1,
|
|
0x81, 0x40, 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41,
|
|
0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41, 0x01, 0xC0,
|
|
0x80, 0x41, 0x00, 0xC1, 0x81, 0x40, 0x00, 0xC1, 0x81, 0x40,
|
|
0x01, 0xC0, 0x80, 0x41, 0x01, 0xC0, 0x80, 0x41, 0x00, 0xC1,
|
|
0x81, 0x40, 0x01, 0xC0, 0x80, 0x41, 0x00, 0xC1, 0x81, 0x40,
|
|
0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41, 0x01, 0xC0,
|
|
0x80, 0x41, 0x00, 0xC1, 0x81, 0x40, 0x00, 0xC1, 0x81, 0x40,
|
|
0x01, 0xC0, 0x80, 0x41, 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0,
|
|
0x80, 0x41, 0x01, 0xC0, 0x80, 0x41, 0x00, 0xC1, 0x81, 0x40,
|
|
0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41, 0x01, 0xC0,
|
|
0x80, 0x41, 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41,
|
|
0x00, 0xC1, 0x81, 0x40, 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0,
|
|
0x80, 0x41, 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41,
|
|
0x01, 0xC0, 0x80, 0x41, 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0,
|
|
0x80, 0x41, 0x00, 0xC1, 0x81, 0x40, 0x00, 0xC1, 0x81, 0x40,
|
|
0x01, 0xC0, 0x80, 0x41, 0x01, 0xC0, 0x80, 0x41, 0x00, 0xC1,
|
|
0x81, 0x40, 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41,
|
|
0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41, 0x01, 0xC0,
|
|
0x80, 0x41, 0x00, 0xC1, 0x81, 0x40
|
|
} ;
|
|
// CRC 低位字节值表
|
|
static const uint8_t auchCRCLo[] = {
|
|
0x00, 0xC0, 0xC1, 0x01, 0xC3, 0x03, 0x02, 0xC2, 0xC6, 0x06,
|
|
0x07, 0xC7, 0x05, 0xC5, 0xC4, 0x04, 0xCC, 0x0C, 0x0D, 0xCD,
|
|
0x0F, 0xCF, 0xCE, 0x0E, 0x0A, 0xCA, 0xCB, 0x0B, 0xC9, 0x09,
|
|
0x08, 0xC8, 0xD8, 0x18, 0x19, 0xD9, 0x1B, 0xDB, 0xDA, 0x1A,
|
|
0x1E, 0xDE, 0xDF, 0x1F, 0xDD, 0x1D, 0x1C, 0xDC, 0x14, 0xD4,
|
|
0xD5, 0x15, 0xD7, 0x17, 0x16, 0xD6, 0xD2, 0x12, 0x13, 0xD3,
|
|
0x11, 0xD1, 0xD0, 0x10, 0xF0, 0x30, 0x31, 0xF1, 0x33, 0xF3,
|
|
0xF2, 0x32, 0x36, 0xF6, 0xF7, 0x37, 0xF5, 0x35, 0x34, 0xF4,
|
|
0x3C, 0xFC, 0xFD, 0x3D, 0xFF, 0x3F, 0x3E, 0xFE, 0xFA, 0x3A,
|
|
0x3B, 0xFB, 0x39, 0xF9, 0xF8, 0x38, 0x28, 0xE8, 0xE9, 0x29,
|
|
0xEB, 0x2B, 0x2A, 0xEA, 0xEE, 0x2E, 0x2F, 0xEF, 0x2D, 0xED,
|
|
0xEC, 0x2C, 0xE4, 0x24, 0x25, 0xE5, 0x27, 0xE7, 0xE6, 0x26,
|
|
0x22, 0xE2, 0xE3, 0x23, 0xE1, 0x21, 0x20, 0xE0, 0xA0, 0x60,
|
|
0x61, 0xA1, 0x63, 0xA3, 0xA2, 0x62, 0x66, 0xA6, 0xA7, 0x67,
|
|
0xA5, 0x65, 0x64, 0xA4, 0x6C, 0xAC, 0xAD, 0x6D, 0xAF, 0x6F,
|
|
0x6E, 0xAE, 0xAA, 0x6A, 0x6B, 0xAB, 0x69, 0xA9, 0xA8, 0x68,
|
|
0x78, 0xB8, 0xB9, 0x79, 0xBB, 0x7B, 0x7A, 0xBA, 0xBE, 0x7E,
|
|
0x7F, 0xBF, 0x7D, 0xBD, 0xBC, 0x7C, 0xB4, 0x74, 0x75, 0xB5,
|
|
0x77, 0xB7, 0xB6, 0x76, 0x72, 0xB2, 0xB3, 0x73, 0xB1, 0x71,
|
|
0x70, 0xB0, 0x50, 0x90, 0x91, 0x51, 0x93, 0x53, 0x52, 0x92,
|
|
0x96, 0x56, 0x57, 0x97, 0x55, 0x95, 0x94, 0x54, 0x9C, 0x5C,
|
|
0x5D, 0x9D, 0x5F, 0x9F, 0x9E, 0x5E, 0x5A, 0x9A, 0x9B, 0x5B,
|
|
0x99, 0x59, 0x58, 0x98, 0x88, 0x48, 0x49, 0x89, 0x4B, 0x8B,
|
|
0x8A, 0x4A, 0x4E, 0x8E, 0x8F, 0x4F, 0x8D, 0x4D, 0x4C, 0x8C,
|
|
0x44, 0x84, 0x85, 0x45, 0x87, 0x47, 0x46, 0x86, 0x82, 0x42,
|
|
0x43, 0x83, 0x41, 0x81, 0x80, 0x40
|
|
};
|
|
|
|
|
|
/**
|
|
* 函数功能: Modbus CRC16 校验计算函数
|
|
* 输入参数: pushMsg:待计算的数据首地址,usDataLen:数据长度
|
|
* 返 回 值: CRC16 计算结果
|
|
* 说 明: 计算结果是高位在前,需要转换才能发送
|
|
*/
|
|
uint16_t MB_CRC16(uint8_t *pushMsg,uint8_t usDataLen)
|
|
{
|
|
uint8_t uchCRCHi = 0xFF;
|
|
uint8_t uchCRCLo = 0xFF;
|
|
uint16_t uIndex;
|
|
while(usDataLen--)
|
|
{
|
|
uIndex = uchCRCLo ^ *pushMsg++;
|
|
uchCRCLo = uchCRCHi^auchCRCHi[uIndex];
|
|
uchCRCHi = auchCRCLo[uIndex];
|
|
}
|
|
return (uchCRCHi<<8|uchCRCLo);
|
|
}
|
|
|
|
/**
|
|
* 函数功能: 读N个线圈状态(CoilStatue)
|
|
* 输入参数: _addr:从站地址,_reg:寄存器地址,_num:待读取的数量
|
|
* 返 回 值: 无
|
|
* 说 明: 填充数据发送缓存区,然后发送
|
|
*/
|
|
void MB_ReadCoil_01H(struct UARTHandler *uartHandler,uint8_t _addr, uint16_t _reg, uint16_t _num)
|
|
{
|
|
uint16_t TxCount = 0;
|
|
|
|
uint16_t crc = 0;
|
|
Tx_Buf[TxCount++] = _addr; /* 从站地址 */
|
|
Tx_Buf[TxCount++] = 0x01; /* 功能码 */
|
|
Tx_Buf[TxCount++] = _reg >> 8; /* 寄存器地址 高字节 */
|
|
Tx_Buf[TxCount++] = _reg; /* 寄存器地址 低字节 */
|
|
Tx_Buf[TxCount++] = _num >> 8; /* 线圈(bit)个数 高字节 */
|
|
Tx_Buf[TxCount++] = _num; /* 线圈(bit)个数 低字节 */
|
|
|
|
crc = MB_CRC16((uint8_t*)&uartHandler->Tx_Buf,TxCount);
|
|
Tx_Buf[TxCount++] = crc; /* crc 低字节 */
|
|
Tx_Buf[TxCount++] = crc>>8; /* crc 高字节 */
|
|
TxCount=TxCount;
|
|
uartHandler->UART_Tx(uartHandler,(uint8_t *)&Tx_Buf,TxCount);
|
|
//UART_Tx((uint8_t *)&Tx_Buf,TxCount);
|
|
}
|
|
|
|
/**
|
|
* 函数功能: 写单个线圈状态(CoilStatue)
|
|
* 输入参数: _addr:从站地址,_reg:寄存器地址,_sta:待写入的线圈状态(0,1)
|
|
* 返 回 值: 无
|
|
* 说 明: 填充数据发送缓存区,然后发送
|
|
*/
|
|
void MB_WriteCoil_05H(struct UARTHandler *uartHandler,uint8_t _addr, uint16_t _reg, uint16_t _sta)
|
|
{
|
|
uint16_t TxCount = 0;
|
|
uint16_t crc = 0;
|
|
Tx_Buf[TxCount++] = _addr; /* 从站地址 */
|
|
Tx_Buf[TxCount++] = 0x05; /* 功能码 */
|
|
Tx_Buf[TxCount++] = _reg >> 8; /* 寄存器地址 高字节 */
|
|
Tx_Buf[TxCount++] = _reg; /* 寄存器地址 低字节 */
|
|
Tx_Buf[TxCount++] = _sta >> 8; /* 线圈(bit)个数 高字节 */
|
|
Tx_Buf[TxCount++] = _sta; /* 线圈(bit)个数 低字节 */
|
|
|
|
crc = MB_CRC16((uint8_t*)&Tx_Buf,TxCount);
|
|
Tx_Buf[TxCount++] = crc; /* crc 低字节 */
|
|
Tx_Buf[TxCount++] = crc>>8; /* crc 高字节 */
|
|
|
|
|
|
//UART_Tx((uint8_t *)&Tx_Buf,TxCount);
|
|
|
|
uartHandler->UART_Tx(uartHandler,(uint8_t *)&Tx_Buf,TxCount);
|
|
}
|
|
|
|
/**
|
|
* 函数功能: 读输入状态状态(InputStatue)
|
|
* 输入参数: _addr:从站地址,_reg:寄存器地址,_num:待读取的输入数量
|
|
* 返 回 值: 无
|
|
* 说 明: 填充数据发送缓存区,然后发送
|
|
*/
|
|
void MB_ReadInput_02H(struct UARTHandler *uartHandler,uint8_t _addr, uint16_t _reg, uint16_t _num)
|
|
{
|
|
uint16_t TxCount = 0;
|
|
uint16_t crc = 0;
|
|
Tx_Buf[TxCount++] = _addr; /* 从站地址 */
|
|
Tx_Buf[TxCount++] = 0x02; /* 功能码 */
|
|
Tx_Buf[TxCount++] = _reg >> 8; /* 寄存器地址 高字节 */
|
|
Tx_Buf[TxCount++] = _reg; /* 寄存器地址 低字节 */
|
|
Tx_Buf[TxCount++] = _num >> 8; /* 开关(Input)个数 高字节 */
|
|
Tx_Buf[TxCount++] = _num; /* 开关(Input)个数 低字节 */
|
|
|
|
crc = MB_CRC16((uint8_t*)&Tx_Buf,TxCount);
|
|
Tx_Buf[TxCount++] = crc; /* crc 低字节 */
|
|
Tx_Buf[TxCount++] = crc>>8; /* crc 高字节 */
|
|
//UART_Tx((uint8_t *)&Tx_Buf,TxCount);
|
|
uartHandler->UART_Tx(uartHandler,(uint8_t *)&Tx_Buf,TxCount);
|
|
}
|
|
|
|
/**
|
|
* 函数功能: 读保持寄存器(HoldingRegister)
|
|
* 输入参数: _addr:从站地址,_reg:寄存器地址,_num:待读取的寄存器数量
|
|
* 返 回 值: 无
|
|
* 说 明: 填充数据发送缓存区,然后发送
|
|
*/
|
|
void MB_ReadHoldingReg_03H(struct UARTHandler *uartHandler,uint8_t _addr, uint16_t _reg, uint16_t _num)
|
|
{
|
|
MB_rx_flag=2;
|
|
Read_Reg_Num=_num;
|
|
Read_Slave_ID=_addr;
|
|
Read_Start_Reg_Num=_reg;
|
|
uint16_t TxCount = 0;
|
|
uint16_t crc = 0;
|
|
Tx_Buf[TxCount++] = _addr; /* 从站地址 */
|
|
Tx_Buf[TxCount++] = 0x03; /* 功能码 */
|
|
Tx_Buf[TxCount++] = _reg >> 8; /* 寄存器地址 高字节 */
|
|
Tx_Buf[TxCount++] = _reg; /* 寄存器地址 低字节 */
|
|
Tx_Buf[TxCount++] = _num >> 8; /* 寄存器(16bits)个数 高字节 */
|
|
Tx_Buf[TxCount++] = _num; /* 低字节 */
|
|
|
|
crc = MB_CRC16((uint8_t*)&Tx_Buf,TxCount);
|
|
Tx_Buf[TxCount++] = crc; /* crc 低字节 */
|
|
Tx_Buf[TxCount++] = crc>>8; /* crc 高字节 */
|
|
//UART_Tx((uint8_t *)&Tx_Buf,TxCount);
|
|
uartHandler->UART_Tx(uartHandler,(uint8_t *)&Tx_Buf,TxCount);
|
|
}
|
|
|
|
/**
|
|
* 函数功能: 读N个输入寄存器(InputRegister)
|
|
* 输入参数: _addr:从站地址,_reg:寄存器地址,_num:待读取的寄存器数量
|
|
* 返 回 值: 无
|
|
* 说 明: 填充数据发送缓存区,然后发送.
|
|
*/
|
|
void MB_ReadInputReg_04H(struct UARTHandler *uartHandler,uint8_t _addr, uint16_t _reg, uint16_t _num)
|
|
{
|
|
uint16_t TxCount = 0;
|
|
uint16_t crc = 0;
|
|
Tx_Buf[TxCount++] = _addr; /* 从站地址 */
|
|
Tx_Buf[TxCount++] = 0x04; /* 功能码 */
|
|
Tx_Buf[TxCount++] = _reg >> 8; /* 寄存器地址 高字节 */
|
|
Tx_Buf[TxCount++] = _reg; /* 寄存器地址 低字节 */
|
|
Tx_Buf[TxCount++] = _num >> 8; /* 寄存器(16bits)个数 高字节 */
|
|
Tx_Buf[TxCount++] = _num; /* 低字节 */
|
|
|
|
crc = MB_CRC16((uint8_t*)&Tx_Buf,TxCount);
|
|
Tx_Buf[TxCount++] = crc; /* crc 低字节 */
|
|
Tx_Buf[TxCount++] = crc>>8; /* crc 高字节 */
|
|
uartHandler->UART_Tx(uartHandler,(uint8_t *)&Tx_Buf,TxCount);
|
|
//UART_Tx((uint8_t *)&Tx_Buf,TxCount);
|
|
}
|
|
|
|
/**
|
|
* 函数功能: 写单个保持寄存器(HoldingRegister)
|
|
* 输入参数: _addr:从站地址,_reg:寄存器地址,_data:待写入的寄存器数据
|
|
* 返 回 值: 无
|
|
* 说 明: 填充数据发送缓存区,然后发送
|
|
*/
|
|
void MB_WriteHoldingReg_06H(struct UARTHandler *uartHandler,uint8_t _addr, uint16_t _reg, uint16_t _data)
|
|
{
|
|
uint16_t TxCount = 0;
|
|
uint16_t crc = 0;
|
|
Tx_Buf[TxCount++] = _addr; /* 从站地址 */
|
|
Tx_Buf[TxCount++] = 0x06; /* 功能码 */
|
|
Tx_Buf[TxCount++] = _reg >> 8; /* 寄存器地址 高字节 */
|
|
Tx_Buf[TxCount++] = _reg; /* 寄存器地址 低字节 */
|
|
Tx_Buf[TxCount++] = _data >> 8; /* 寄存器(16bits)个数 高字节 */
|
|
Tx_Buf[TxCount++] = _data; /* 低字节 */
|
|
|
|
crc = MB_CRC16((uint8_t*)&Tx_Buf,TxCount);
|
|
Tx_Buf[TxCount++] = crc; /* crc 低字节 */
|
|
Tx_Buf[TxCount++] = crc>>8; /* crc 高字节 */
|
|
//UART_Tx((uint8_t *)&Tx_Buf,TxCount);
|
|
uartHandler->UART_Tx(uartHandler,(uint8_t *)&Tx_Buf,TxCount);
|
|
}
|
|
|
|
/**
|
|
* 函数功能: 写N个保持寄存器(HoldingRegister)
|
|
* 输入参数: _addr:从站地址,_reg:寄存器地址,_num:待写入的寄存器数量,_databuf:待写入的寄存器数据
|
|
* 返 回 值: 无
|
|
* 说 明: 填充数据发送缓存区,然后发送._databuf的长度需 >= _num*2
|
|
*/
|
|
void MB_WriteNumHoldingReg_10H(struct UARTHandler *uartHandler,uint8_t _addr, uint16_t _reg, uint16_t _num,uint8_t *_databuf)
|
|
{
|
|
|
|
uint16_t i;
|
|
uint16_t TxCount = 0;
|
|
uint16_t crc = 0;
|
|
Tx_Buf[TxCount++] = _addr; /* 从站地址 */
|
|
Tx_Buf[TxCount++] = 0x10; /* 功能码 */
|
|
Tx_Buf[TxCount++] = _reg >> 8; /* 寄存器地址 高字节 */
|
|
Tx_Buf[TxCount++] = _reg; /* 寄存器地址 低字节 */
|
|
Tx_Buf[TxCount++] = _num >> 8; /* 寄存器(16bits)个数 高字节 */
|
|
Tx_Buf[TxCount++] = _num; /* 低字节 */
|
|
Tx_Buf[TxCount++] = _num<<1; /* 数据个数 */
|
|
|
|
for (i = 0; i < 2 * _num; i++)
|
|
{
|
|
Tx_Buf[TxCount++] = _databuf[i]; /* 后面的数据长度 */
|
|
}
|
|
crc = MB_CRC16((uint8_t*)&Tx_Buf,TxCount);
|
|
Tx_Buf[TxCount++] = crc; /* crc 低字节 */
|
|
Tx_Buf[TxCount++] = crc>>8; /* crc 高字节 */
|
|
//UART_Tx((uint8_t *)&Tx_Buf,TxCount);
|
|
uartHandler->UART_Tx(uartHandler,Tx_Buf,TxCount);
|
|
}
|
|
|
|
|
|
void Encoder_UART_Decode(uint8_t buffer[], uint16_t length)
|
|
{
|
|
switch(MB_rx_flag)
|
|
{
|
|
case 1:
|
|
//write("myVar is 1");
|
|
break;
|
|
|
|
case 2://MB_ReadHoldingReg_03H
|
|
{
|
|
|
|
|
|
uint16_t crc_check = ( (buffer[length-1]<<8) | buffer[length-2] );
|
|
/* CRC 校验正确 */
|
|
if(crc_check == MB_CRC16(buffer,length-2))
|
|
{
|
|
|
|
int i =0;
|
|
for (i = 0; i < Read_Reg_Num; i++)
|
|
{
|
|
Receive_Data_Result[Read_Slave_ID][Read_Start_Reg_Num+i]=(buffer[3+2*i]<<8)+buffer[4+2*i];
|
|
}
|
|
for (i = 0; i < Read_Reg_Num; i++)
|
|
{
|
|
// Write("读取的数据值 是 %d",Receive_Data_Result[Read_Slave_ID][Read_Start_Reg_Num+i]);
|
|
}
|
|
|
|
}
|
|
}
|
|
break;
|
|
|
|
case 3:
|
|
//write("myVar is 3");
|
|
break;
|
|
|
|
default: break;
|
|
//write("myVar is not 1, 2 or 3");
|
|
}
|
|
}
|
|
|
|
|