You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
531 lines
31 KiB
531 lines
31 KiB
/**
|
|
******************************************************************************
|
|
* @file stm32h7xx_hal_tim_ex.h
|
|
* @author MCD Application Team
|
|
* @brief Header file of TIM HAL Extended module.
|
|
******************************************************************************
|
|
* @attention
|
|
*
|
|
* Copyright (c) 2017 STMicroelectronics.
|
|
* All rights reserved.
|
|
*
|
|
* This software is licensed under terms that can be found in the LICENSE file
|
|
* in the root directory of this software component.
|
|
* If no LICENSE file comes with this software, it is provided AS-IS.
|
|
*
|
|
******************************************************************************
|
|
*/
|
|
|
|
/* Define to prevent recursive inclusion -------------------------------------*/
|
|
#ifndef STM32H7xx_HAL_TIM_EX_H
|
|
#define STM32H7xx_HAL_TIM_EX_H
|
|
|
|
#ifdef __cplusplus
|
|
extern "C" {
|
|
#endif
|
|
|
|
/* Includes ------------------------------------------------------------------*/
|
|
#include "stm32h7xx_hal_def.h"
|
|
|
|
/** @addtogroup STM32H7xx_HAL_Driver
|
|
* @{
|
|
*/
|
|
|
|
/** @addtogroup TIMEx
|
|
* @{
|
|
*/
|
|
|
|
/* Exported types ------------------------------------------------------------*/
|
|
/** @defgroup TIMEx_Exported_Types TIM Extended Exported Types
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @brief TIM Hall sensor Configuration Structure definition
|
|
*/
|
|
|
|
typedef struct
|
|
{
|
|
uint32_t IC1Polarity; /*!< Specifies the active edge of the input signal.
|
|
This parameter can be a value of @ref TIM_Input_Capture_Polarity */
|
|
|
|
uint32_t IC1Prescaler; /*!< Specifies the Input Capture Prescaler.
|
|
This parameter can be a value of @ref TIM_Input_Capture_Prescaler */
|
|
|
|
uint32_t IC1Filter; /*!< Specifies the input capture filter.
|
|
This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
|
|
|
|
uint32_t Commutation_Delay; /*!< Specifies the pulse value to be loaded into the Capture Compare Register.
|
|
This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */
|
|
} TIM_HallSensor_InitTypeDef;
|
|
#if defined(TIM_BREAK_INPUT_SUPPORT)
|
|
|
|
/**
|
|
* @brief TIM Break/Break2 input configuration
|
|
*/
|
|
typedef struct
|
|
{
|
|
uint32_t Source; /*!< Specifies the source of the timer break input.
|
|
This parameter can be a value of @ref TIMEx_Break_Input_Source */
|
|
uint32_t Enable; /*!< Specifies whether or not the break input source is enabled.
|
|
This parameter can be a value of @ref TIMEx_Break_Input_Source_Enable */
|
|
uint32_t Polarity; /*!< Specifies the break input source polarity.
|
|
This parameter can be a value of @ref TIMEx_Break_Input_Source_Polarity
|
|
Not relevant when analog watchdog output of the DFSDM1 used as break input source */
|
|
} TIMEx_BreakInputConfigTypeDef;
|
|
|
|
#endif /* TIM_BREAK_INPUT_SUPPORT */
|
|
/**
|
|
* @}
|
|
*/
|
|
/* End of exported types -----------------------------------------------------*/
|
|
|
|
/* Exported constants --------------------------------------------------------*/
|
|
/** @defgroup TIMEx_Exported_Constants TIM Extended Exported Constants
|
|
* @{
|
|
*/
|
|
|
|
/** @defgroup TIMEx_Remap TIM Extended Remapping
|
|
* @{
|
|
*/
|
|
#define TIM_TIM1_ETR_GPIO 0x00000000U /* !< TIM1_ETR is connected to GPIO */
|
|
#define TIM_TIM1_ETR_COMP1 TIM1_AF1_ETRSEL_0 /* !< TIM1_ETR is connected to COMP1 OUT */
|
|
#define TIM_TIM1_ETR_COMP2 TIM1_AF1_ETRSEL_1 /* !< TIM1_ETR is connected to COMP2 OUT */
|
|
#define TIM_TIM1_ETR_ADC1_AWD1 (TIM1_AF1_ETRSEL_1 | TIM1_AF1_ETRSEL_0) /* !< TIM1_ETR is connected to ADC1 AWD1 */
|
|
#define TIM_TIM1_ETR_ADC1_AWD2 (TIM1_AF1_ETRSEL_2) /* !< TIM1_ETR is connected to ADC1 AWD2 */
|
|
#define TIM_TIM1_ETR_ADC1_AWD3 (TIM1_AF1_ETRSEL_2 | TIM1_AF1_ETRSEL_0) /* !< TIM1_ETR is connected to ADC1 AWD3 */
|
|
#define TIM_TIM1_ETR_ADC3_AWD1 (TIM1_AF1_ETRSEL_2 | TIM1_AF1_ETRSEL_1) /* !< TIM1_ETR is connected to ADC3 AWD1 */
|
|
#define TIM_TIM1_ETR_ADC3_AWD2 (TIM1_AF1_ETRSEL_2 | TIM1_AF1_ETRSEL_1 | TIM1_AF1_ETRSEL_0) /* !< TIM1_ETR is connected to ADC3 AWD2 */
|
|
#define TIM_TIM1_ETR_ADC3_AWD3 TIM1_AF1_ETRSEL_3 /* !< TIM1_ETR is connected to ADC3 AWD3 */
|
|
|
|
#define TIM_TIM8_ETR_GPIO 0x00000000U /* !< TIM8_ETR is connected to GPIO */
|
|
#define TIM_TIM8_ETR_COMP1 TIM8_AF1_ETRSEL_0 /* !< TIM8_ETR is connected to COMP1 OUT */
|
|
#define TIM_TIM8_ETR_COMP2 TIM8_AF1_ETRSEL_1 /* !< TIM8_ETR is connected to COMP2 OUT */
|
|
#define TIM_TIM8_ETR_ADC2_AWD1 (TIM8_AF1_ETRSEL_1 | TIM8_AF1_ETRSEL_0) /* !< TIM8_ETR is connected to ADC2 AWD1 */
|
|
#define TIM_TIM8_ETR_ADC2_AWD2 (TIM8_AF1_ETRSEL_2) /* !< TIM8_ETR is connected to ADC2 AWD2 */
|
|
#define TIM_TIM8_ETR_ADC2_AWD3 (TIM8_AF1_ETRSEL_2 | TIM8_AF1_ETRSEL_0) /* !< TIM8_ETR is connected to ADC2 AWD3 */
|
|
#define TIM_TIM8_ETR_ADC3_AWD1 (TIM8_AF1_ETRSEL_2 | TIM8_AF1_ETRSEL_1) /* !< TIM8_ETR is connected to ADC3 AWD1 */
|
|
#define TIM_TIM8_ETR_ADC3_AWD2 (TIM8_AF1_ETRSEL_2 | TIM8_AF1_ETRSEL_1 | TIM8_AF1_ETRSEL_0) /* !< TIM8_ETR is connected to ADC3 AWD2 */
|
|
#define TIM_TIM8_ETR_ADC3_AWD3 TIM8_AF1_ETRSEL_3 /* !< TIM8_ETR is connected to ADC3 AWD3 */
|
|
|
|
#define TIM_TIM2_ETR_GPIO 0x00000000U /* !< TIM2_ETR is connected to GPIO */
|
|
#define TIM_TIM2_ETR_COMP1 (TIM2_AF1_ETRSEL_0) /* !< TIM2_ETR is connected to COMP1 OUT */
|
|
#define TIM_TIM2_ETR_COMP2 (TIM2_AF1_ETRSEL_1) /* !< TIM2_ETR is connected to COMP2 OUT */
|
|
#define TIM_TIM2_ETR_RCC_LSE (TIM2_AF1_ETRSEL_1 | TIM8_AF1_ETRSEL_0) /* !< TIM2_ETR is connected to RCC LSE */
|
|
#define TIM_TIM2_ETR_SAI1_FSA TIM2_AF1_ETRSEL_2 /* !< TIM2_ETR is connected to SAI1 FS_A */
|
|
#define TIM_TIM2_ETR_SAI1_FSB (TIM2_AF1_ETRSEL_2 | TIM8_AF1_ETRSEL_0) /* !< TIM2_ETR is connected to SAI1 FS_B */
|
|
|
|
#define TIM_TIM3_ETR_GPIO 0x00000000U /* !< TIM3_ETR is connected to GPIO */
|
|
#define TIM_TIM3_ETR_COMP1 TIM3_AF1_ETRSEL_0 /* !< TIM3_ETR is connected to COMP1 OUT */
|
|
|
|
#define TIM_TIM5_ETR_GPIO 0x00000000U /* !< TIM5_ETR is connected to GPIO */
|
|
#define TIM_TIM5_ETR_SAI2_FSA TIM5_AF1_ETRSEL_0 /* !< TIM5_ETR is connected to SAI2 FS_A */
|
|
#define TIM_TIM5_ETR_SAI2_FSB TIM5_AF1_ETRSEL_1 /* !< TIM5_ETR is connected to SAI2 FS_B */
|
|
#define TIM_TIM5_ETR_SAI4_FSA TIM5_AF1_ETRSEL_0 /* !< TIM5_ETR is connected to SAI4 FS_A */
|
|
#define TIM_TIM5_ETR_SAI4_FSB TIM5_AF1_ETRSEL_1 /* !< TIM5_ETR is connected to SAI4 FS_B */
|
|
|
|
#define TIM_TIM23_ETR_GPIO 0x00000000U /* !< TIM23_ETR is connected to GPIO */
|
|
#define TIM_TIM23_ETR_COMP1 (TIM2_AF1_ETRSEL_0) /* !< TIM23_ETR is connected to COMP1 OUT */
|
|
#define TIM_TIM23_ETR_COMP2 (TIM2_AF1_ETRSEL_1) /* !< TIM23_ETR is connected to COMP2 OUT */
|
|
|
|
#define TIM_TIM24_ETR_GPIO 0x00000000U /* !< TIM24_ETR is connected to GPIO */
|
|
#define TIM_TIM24_ETR_SAI4_FSA TIM5_AF1_ETRSEL_0 /* !< TIM24_ETR is connected to SAI4 FS_A */
|
|
#define TIM_TIM24_ETR_SAI4_FSB TIM5_AF1_ETRSEL_1 /* !< TIM24_ETR is connected to SAI4 FS_B */
|
|
#define TIM_TIM24_ETR_SAI1_FSA (TIM2_AF1_ETRSEL_1 | TIM8_AF1_ETRSEL_0) /* !< TIM24_ETR is connected to SAI1 FS_A */
|
|
#define TIM_TIM24_ETR_SAI1_FSB TIM2_AF1_ETRSEL_2 /* !< TIM24_ETR is connected to SAI1 FS_B */
|
|
/**
|
|
* @}
|
|
*/
|
|
#if defined(TIM_BREAK_INPUT_SUPPORT)
|
|
|
|
/** @defgroup TIMEx_Break_Input TIM Extended Break input
|
|
* @{
|
|
*/
|
|
#define TIM_BREAKINPUT_BRK 0x00000001U /*!< Timer break input */
|
|
#define TIM_BREAKINPUT_BRK2 0x00000002U /*!< Timer break2 input */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup TIMEx_Break_Input_Source TIM Extended Break input source
|
|
* @{
|
|
*/
|
|
#define TIM_BREAKINPUTSOURCE_BKIN 0x00000001U /* !< An external source (GPIO) is connected to the BKIN pin */
|
|
#define TIM_BREAKINPUTSOURCE_COMP1 0x00000002U /* !< The COMP1 output is connected to the break input */
|
|
#define TIM_BREAKINPUTSOURCE_COMP2 0x00000004U /* !< The COMP2 output is connected to the break input */
|
|
#define TIM_BREAKINPUTSOURCE_DFSDM1 0x00000008U /* !< The analog watchdog output of the DFSDM1 peripheral is connected to the break input */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup TIMEx_Break_Input_Source_Enable TIM Extended Break input source enabling
|
|
* @{
|
|
*/
|
|
#define TIM_BREAKINPUTSOURCE_DISABLE 0x00000000U /*!< Break input source is disabled */
|
|
#define TIM_BREAKINPUTSOURCE_ENABLE 0x00000001U /*!< Break input source is enabled */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup TIMEx_Break_Input_Source_Polarity TIM Extended Break input polarity
|
|
* @{
|
|
*/
|
|
#define TIM_BREAKINPUTSOURCE_POLARITY_LOW 0x00000001U /*!< Break input source is active low */
|
|
#define TIM_BREAKINPUTSOURCE_POLARITY_HIGH 0x00000000U /*!< Break input source is active_high */
|
|
/**
|
|
* @}
|
|
*/
|
|
#endif /* TIM_BREAK_INPUT_SUPPORT */
|
|
|
|
/** @defgroup TIMEx_Timer_Input_Selection TIM Extended Timer input selection
|
|
* @{
|
|
*/
|
|
#define TIM_TIM1_TI1_GPIO 0x00000000U /* !< TIM1_TI1 is connected to GPIO */
|
|
#define TIM_TIM1_TI1_COMP1 TIM_TISEL_TI1SEL_0 /* !< TIM1_TI1 is connected to COMP1 OUT */
|
|
|
|
#define TIM_TIM8_TI1_GPIO 0x00000000U /* !< TIM8_TI1 is connected to GPIO */
|
|
#define TIM_TIM8_TI1_COMP2 TIM_TISEL_TI1SEL_0 /* !< TIM8_TI1 is connected to COMP2 OUT */
|
|
|
|
#define TIM_TIM2_TI4_GPIO 0x00000000U /* !< TIM2_TI4 is connected to GPIO */
|
|
#define TIM_TIM2_TI4_COMP1 TIM_TISEL_TI4SEL_0 /* !< TIM2_TI4 is connected to COMP1 OUT */
|
|
#define TIM_TIM2_TI4_COMP2 TIM_TISEL_TI4SEL_1 /* !< TIM2_TI4 is connected to COMP2 OUT */
|
|
#define TIM_TIM2_TI4_COMP1_COMP2 (TIM_TISEL_TI4SEL_0 | TIM_TISEL_TI4SEL_1) /* !< TIM2_TI4 is connected to COMP2 OUT OR COMP2 OUT */
|
|
|
|
#define TIM_TIM3_TI1_GPIO 0x00000000U /* !< TIM3_TI1 is connected to GPIO */
|
|
#define TIM_TIM3_TI1_COMP1 TIM_TISEL_TI1SEL_0 /* !< TIM3_TI1 is connected to COMP1 OUT */
|
|
#define TIM_TIM3_TI1_COMP2 TIM_TISEL_TI1SEL_1 /* !< TIM3_TI1 is connected to COMP2 OUT */
|
|
#define TIM_TIM3_TI1_COMP1_COMP2 (TIM_TISEL_TI1SEL_0 | TIM_TISEL_TI1SEL_1) /* !< TIM3_TI1 is connected to COMP1 OUT or COMP2 OUT */
|
|
|
|
#define TIM_TIM5_TI1_GPIO 0x00000000U /* !< TIM5_TI1 is connected to GPIO */
|
|
#define TIM_TIM5_TI1_CAN_TMP TIM_TISEL_TI1SEL_0 /* !< TIM5_TI1 is connected to CAN TMP */
|
|
#define TIM_TIM5_TI1_CAN_RTP TIM_TISEL_TI1SEL_1 /* !< TIM5_TI1 is connected to CAN RTP */
|
|
|
|
#define TIM_TIM12_TI1_GPIO 0x00000000U /* !< TIM12 TI1 is connected to GPIO */
|
|
#define TIM_TIM12_TI1_SPDIF_FS TIM_TISEL_TI1SEL_0 /* !< TIM12 TI1 is connected to SPDIF FS */
|
|
|
|
#define TIM_TIM15_TI1_GPIO 0x00000000U /* !< TIM15_TI1 is connected to GPIO */
|
|
#define TIM_TIM15_TI1_TIM2_CH1 TIM_TISEL_TI1SEL_0 /* !< TIM15_TI1 is connected to TIM2 CH1 */
|
|
#define TIM_TIM15_TI1_TIM3_CH1 TIM_TISEL_TI1SEL_1 /* !< TIM15_TI1 is connected to TIM3 CH1 */
|
|
#define TIM_TIM15_TI1_TIM4_CH1 (TIM_TISEL_TI1SEL_0 | TIM_TISEL_TI1SEL_1) /* !< TIM15_TI1 is connected to TIM4 CH1 */
|
|
#define TIM_TIM15_TI1_RCC_LSE (TIM_TISEL_TI1SEL_2) /* !< TIM15_TI1 is connected to RCC LSE */
|
|
#define TIM_TIM15_TI1_RCC_CSI (TIM_TISEL_TI1SEL_2 | TIM_TISEL_TI1SEL_0) /* !< TIM15_TI1 is connected to RCC CSI */
|
|
#define TIM_TIM15_TI1_RCC_MCO2 (TIM_TISEL_TI1SEL_2 | TIM_TISEL_TI1SEL_1) /* !< TIM15_TI1 is connected to RCC MCO2 */
|
|
|
|
#define TIM_TIM15_TI2_GPIO 0x00000000U /* !< TIM15_TI2 is connected to GPIO */
|
|
#define TIM_TIM15_TI2_TIM2_CH2 (TIM_TISEL_TI2SEL_0) /* !< TIM15_TI2 is connected to TIM2 CH2 */
|
|
#define TIM_TIM15_TI2_TIM3_CH2 (TIM_TISEL_TI2SEL_1) /* !< TIM15_TI2 is connected to TIM3 CH2 */
|
|
#define TIM_TIM15_TI2_TIM4_CH2 (TIM_TISEL_TI2SEL_0 | TIM_TISEL_TI2SEL_1) /* !< TIM15_TI2 is connected to TIM4 CH2 */
|
|
|
|
#define TIM_TIM16_TI1_GPIO 0x00000000U /* !< TIM16 TI1 is connected to GPIO */
|
|
#define TIM_TIM16_TI1_RCC_LSI TIM_TISEL_TI1SEL_0 /* !< TIM16 TI1 is connected to RCC LSI */
|
|
#define TIM_TIM16_TI1_RCC_LSE TIM_TISEL_TI1SEL_1 /* !< TIM16 TI1 is connected to RCC LSE */
|
|
#define TIM_TIM16_TI1_WKUP_IT (TIM_TISEL_TI1SEL_0 | TIM_TISEL_TI1SEL_1) /* !< TIM16 TI1 is connected to WKUP_IT */
|
|
|
|
#define TIM_TIM17_TI1_GPIO 0x00000000U /* !< TIM17 TI1 is connected to GPIO */
|
|
#define TIM_TIM17_TI1_SPDIF_FS TIM_TISEL_TI1SEL_0 /* !< TIM17 TI1 is connected to SPDIF FS */
|
|
#define TIM_TIM17_TI1_RCC_HSE1MHZ TIM_TISEL_TI1SEL_1 /* !< TIM17 TI1 is connected to RCC HSE 1Mhz */
|
|
#define TIM_TIM17_TI1_RCC_MCO1 (TIM_TISEL_TI1SEL_0 | TIM_TISEL_TI1SEL_1) /* !< TIM17 TI1 is connected to RCC MCO1 */
|
|
|
|
#define TIM_TIM23_TI4_GPIO 0x00000000U /* !< TIM23_TI4 is connected to GPIO */
|
|
#define TIM_TIM23_TI4_COMP1 TIM_TISEL_TI4SEL_0 /* !< TIM23_TI4 is connected to COMP1 OUT */
|
|
#define TIM_TIM23_TI4_COMP2 TIM_TISEL_TI4SEL_1 /* !< TIM23_TI4 is connected to COMP2 OUT */
|
|
#define TIM_TIM23_TI4_COMP1_COMP2 (TIM_TISEL_TI4SEL_0 | TIM_TISEL_TI4SEL_1) /* !< TIM23_TI4 is connected to COMP1 OUT or COMP2 OUT */
|
|
|
|
#define TIM_TIM24_TI1_GPIO 0x00000000U /* !< TIM24_TI1 is connected to GPIO */
|
|
#define TIM_TIM24_TI1_CAN_TMP TIM_TISEL_TI1SEL_0 /* !< TIM24_TI1 is connected to CAN TMP */
|
|
#define TIM_TIM24_TI1_CAN_RTP TIM_TISEL_TI1SEL_1 /* !< TIM24_TI1 is connected to CAN RTP */
|
|
#define TIM_TIM24_TI1_CAN_SOC (TIM_TISEL_TI4SEL_0 | TIM_TISEL_TI4SEL_1) /* !< TIM24_TI1 is connected to CAN SOC */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
/* End of exported constants -------------------------------------------------*/
|
|
|
|
/* Exported macro ------------------------------------------------------------*/
|
|
/** @defgroup TIMEx_Exported_Macros TIM Extended Exported Macros
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
/* End of exported macro -----------------------------------------------------*/
|
|
|
|
/* Private macro -------------------------------------------------------------*/
|
|
/** @defgroup TIMEx_Private_Macros TIM Extended Private Macros
|
|
* @{
|
|
*/
|
|
#define IS_TIM_BREAKINPUT(__BREAKINPUT__) (((__BREAKINPUT__) == TIM_BREAKINPUT_BRK) || \
|
|
((__BREAKINPUT__) == TIM_BREAKINPUT_BRK2))
|
|
|
|
#define IS_TIM_BREAKINPUTSOURCE(__SOURCE__) (((__SOURCE__) == TIM_BREAKINPUTSOURCE_BKIN) || \
|
|
((__SOURCE__) == TIM_BREAKINPUTSOURCE_COMP1) || \
|
|
((__SOURCE__) == TIM_BREAKINPUTSOURCE_COMP2) || \
|
|
((__SOURCE__) == TIM_BREAKINPUTSOURCE_DFSDM1))
|
|
|
|
#define IS_TIM_BREAKINPUTSOURCE_STATE(__STATE__) (((__STATE__) == TIM_BREAKINPUTSOURCE_DISABLE) || \
|
|
((__STATE__) == TIM_BREAKINPUTSOURCE_ENABLE))
|
|
|
|
#define IS_TIM_BREAKINPUTSOURCE_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_BREAKINPUTSOURCE_POLARITY_LOW) || \
|
|
((__POLARITY__) == TIM_BREAKINPUTSOURCE_POLARITY_HIGH))
|
|
|
|
#define IS_TIM_TISEL(__TISEL__) (((__TISEL__) == TIM_TIM1_TI1_GPIO) ||\
|
|
((__TISEL__) == TIM_TIM1_TI1_COMP1) ||\
|
|
((__TISEL__) == TIM_TIM8_TI1_GPIO) ||\
|
|
((__TISEL__) == TIM_TIM8_TI1_COMP2) ||\
|
|
((__TISEL__) == TIM_TIM2_TI4_GPIO) ||\
|
|
((__TISEL__) == TIM_TIM2_TI4_COMP1) ||\
|
|
((__TISEL__) == TIM_TIM2_TI4_COMP2) ||\
|
|
((__TISEL__) == TIM_TIM2_TI4_COMP1_COMP2) ||\
|
|
((__TISEL__) == TIM_TIM3_TI1_GPIO) ||\
|
|
((__TISEL__) == TIM_TIM3_TI1_COMP1) ||\
|
|
((__TISEL__) == TIM_TIM3_TI1_COMP2) ||\
|
|
((__TISEL__) == TIM_TIM3_TI1_COMP1_COMP2) ||\
|
|
((__TISEL__) == TIM_TIM5_TI1_GPIO) ||\
|
|
((__TISEL__) == TIM_TIM5_TI1_CAN_TMP) ||\
|
|
((__TISEL__) == TIM_TIM5_TI1_CAN_RTP) ||\
|
|
((__TISEL__) == TIM_TIM12_TI1_SPDIF_FS) ||\
|
|
((__TISEL__) == TIM_TIM12_TI1_GPIO) ||\
|
|
((__TISEL__) == TIM_TIM15_TI1_GPIO) ||\
|
|
((__TISEL__) == TIM_TIM15_TI1_TIM2_CH1) ||\
|
|
((__TISEL__) == TIM_TIM15_TI1_TIM3_CH1) ||\
|
|
((__TISEL__) == TIM_TIM15_TI1_TIM4_CH1) ||\
|
|
((__TISEL__) == TIM_TIM15_TI1_RCC_LSE) ||\
|
|
((__TISEL__) == TIM_TIM15_TI1_RCC_CSI) ||\
|
|
((__TISEL__) == TIM_TIM15_TI1_RCC_MCO2) ||\
|
|
((__TISEL__) == TIM_TIM15_TI2_GPIO) ||\
|
|
((__TISEL__) == TIM_TIM15_TI2_TIM2_CH2) ||\
|
|
((__TISEL__) == TIM_TIM15_TI2_TIM3_CH2) ||\
|
|
((__TISEL__) == TIM_TIM15_TI2_TIM4_CH2) ||\
|
|
((__TISEL__) == TIM_TIM16_TI1_GPIO) ||\
|
|
((__TISEL__) == TIM_TIM16_TI1_RCC_LSI) ||\
|
|
((__TISEL__) == TIM_TIM16_TI1_RCC_LSE) ||\
|
|
((__TISEL__) == TIM_TIM16_TI1_WKUP_IT) ||\
|
|
((__TISEL__) == TIM_TIM17_TI1_GPIO) ||\
|
|
((__TISEL__) == TIM_TIM17_TI1_SPDIF_FS) ||\
|
|
((__TISEL__) == TIM_TIM17_TI1_RCC_HSE1MHZ) ||\
|
|
((__TISEL__) == TIM_TIM17_TI1_RCC_MCO1) ||\
|
|
((__TISEL__) == TIM_TIM23_TI4_GPIO) ||\
|
|
((__TISEL__) == TIM_TIM23_TI4_COMP1) ||\
|
|
((__TISEL__) == TIM_TIM23_TI4_COMP2) ||\
|
|
((__TISEL__) == TIM_TIM23_TI4_COMP1_COMP2) ||\
|
|
((__TISEL__) == TIM_TIM24_TI1_GPIO) ||\
|
|
((__TISEL__) == TIM_TIM24_TI1_CAN_TMP) ||\
|
|
((__TISEL__) == TIM_TIM24_TI1_CAN_RTP) ||\
|
|
((__TISEL__) == TIM_TIM24_TI1_CAN_SOC))
|
|
|
|
#define IS_TIM_REMAP(__RREMAP__) (((__RREMAP__) == TIM_TIM1_ETR_GPIO) ||\
|
|
((__RREMAP__) == TIM_TIM1_ETR_ADC1_AWD1) ||\
|
|
((__RREMAP__) == TIM_TIM1_ETR_ADC1_AWD2) ||\
|
|
((__RREMAP__) == TIM_TIM1_ETR_ADC1_AWD3) ||\
|
|
((__RREMAP__) == TIM_TIM1_ETR_ADC3_AWD1) ||\
|
|
((__RREMAP__) == TIM_TIM1_ETR_ADC3_AWD2) ||\
|
|
((__RREMAP__) == TIM_TIM1_ETR_ADC3_AWD3) ||\
|
|
((__RREMAP__) == TIM_TIM1_ETR_COMP1) ||\
|
|
((__RREMAP__) == TIM_TIM1_ETR_COMP2) ||\
|
|
((__RREMAP__) == TIM_TIM8_ETR_GPIO) ||\
|
|
((__RREMAP__) == TIM_TIM8_ETR_ADC2_AWD1) ||\
|
|
((__RREMAP__) == TIM_TIM8_ETR_ADC2_AWD2) ||\
|
|
((__RREMAP__) == TIM_TIM8_ETR_ADC2_AWD3) ||\
|
|
((__RREMAP__) == TIM_TIM8_ETR_ADC3_AWD1) ||\
|
|
((__RREMAP__) == TIM_TIM8_ETR_ADC3_AWD2) ||\
|
|
((__RREMAP__) == TIM_TIM8_ETR_ADC3_AWD3) ||\
|
|
((__RREMAP__) == TIM_TIM8_ETR_COMP1) ||\
|
|
((__RREMAP__) == TIM_TIM8_ETR_COMP2) ||\
|
|
((__RREMAP__) == TIM_TIM2_ETR_GPIO) ||\
|
|
((__RREMAP__) == TIM_TIM2_ETR_COMP1) ||\
|
|
((__RREMAP__) == TIM_TIM2_ETR_COMP2) ||\
|
|
((__RREMAP__) == TIM_TIM2_ETR_RCC_LSE) ||\
|
|
((__RREMAP__) == TIM_TIM2_ETR_SAI1_FSA) ||\
|
|
((__RREMAP__) == TIM_TIM2_ETR_SAI1_FSB) ||\
|
|
((__RREMAP__) == TIM_TIM3_ETR_GPIO) ||\
|
|
((__RREMAP__) == TIM_TIM3_ETR_COMP1) ||\
|
|
((__RREMAP__) == TIM_TIM5_ETR_GPIO) ||\
|
|
((__RREMAP__) == TIM_TIM5_ETR_SAI2_FSA) ||\
|
|
((__RREMAP__) == TIM_TIM5_ETR_SAI2_FSB) ||\
|
|
((__RREMAP__) == TIM_TIM23_ETR_GPIO) ||\
|
|
((__RREMAP__) == TIM_TIM23_ETR_COMP1) ||\
|
|
((__RREMAP__) == TIM_TIM23_ETR_COMP2) ||\
|
|
((__RREMAP__) == TIM_TIM24_ETR_GPIO) ||\
|
|
((__RREMAP__) == TIM_TIM24_ETR_SAI4_FSA) ||\
|
|
((__RREMAP__) == TIM_TIM24_ETR_SAI4_FSB) ||\
|
|
((__RREMAP__) == TIM_TIM24_ETR_SAI1_FSA) ||\
|
|
((__RREMAP__) == TIM_TIM24_ETR_SAI1_FSB))
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
/* End of private macro ------------------------------------------------------*/
|
|
|
|
/* Exported functions --------------------------------------------------------*/
|
|
/** @addtogroup TIMEx_Exported_Functions TIM Extended Exported Functions
|
|
* @{
|
|
*/
|
|
|
|
/** @addtogroup TIMEx_Exported_Functions_Group1 Extended Timer Hall Sensor functions
|
|
* @brief Timer Hall Sensor functions
|
|
* @{
|
|
*/
|
|
/* Timer Hall Sensor functions **********************************************/
|
|
HAL_StatusTypeDef HAL_TIMEx_HallSensor_Init(TIM_HandleTypeDef *htim, TIM_HallSensor_InitTypeDef *sConfig);
|
|
HAL_StatusTypeDef HAL_TIMEx_HallSensor_DeInit(TIM_HandleTypeDef *htim);
|
|
|
|
void HAL_TIMEx_HallSensor_MspInit(TIM_HandleTypeDef *htim);
|
|
void HAL_TIMEx_HallSensor_MspDeInit(TIM_HandleTypeDef *htim);
|
|
|
|
/* Blocking mode: Polling */
|
|
HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start(TIM_HandleTypeDef *htim);
|
|
HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop(TIM_HandleTypeDef *htim);
|
|
/* Non-Blocking mode: Interrupt */
|
|
HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_IT(TIM_HandleTypeDef *htim);
|
|
HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_IT(TIM_HandleTypeDef *htim);
|
|
/* Non-Blocking mode: DMA */
|
|
HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_DMA(TIM_HandleTypeDef *htim, uint32_t *pData, uint16_t Length);
|
|
HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_DMA(TIM_HandleTypeDef *htim);
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @addtogroup TIMEx_Exported_Functions_Group2 Extended Timer Complementary Output Compare functions
|
|
* @brief Timer Complementary Output Compare functions
|
|
* @{
|
|
*/
|
|
/* Timer Complementary Output Compare functions *****************************/
|
|
/* Blocking mode: Polling */
|
|
HAL_StatusTypeDef HAL_TIMEx_OCN_Start(TIM_HandleTypeDef *htim, uint32_t Channel);
|
|
HAL_StatusTypeDef HAL_TIMEx_OCN_Stop(TIM_HandleTypeDef *htim, uint32_t Channel);
|
|
|
|
/* Non-Blocking mode: Interrupt */
|
|
HAL_StatusTypeDef HAL_TIMEx_OCN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
|
|
HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
|
|
|
|
/* Non-Blocking mode: DMA */
|
|
HAL_StatusTypeDef HAL_TIMEx_OCN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length);
|
|
HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel);
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @addtogroup TIMEx_Exported_Functions_Group3 Extended Timer Complementary PWM functions
|
|
* @brief Timer Complementary PWM functions
|
|
* @{
|
|
*/
|
|
/* Timer Complementary PWM functions ****************************************/
|
|
/* Blocking mode: Polling */
|
|
HAL_StatusTypeDef HAL_TIMEx_PWMN_Start(TIM_HandleTypeDef *htim, uint32_t Channel);
|
|
HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop(TIM_HandleTypeDef *htim, uint32_t Channel);
|
|
|
|
/* Non-Blocking mode: Interrupt */
|
|
HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
|
|
HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
|
|
/* Non-Blocking mode: DMA */
|
|
HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length);
|
|
HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel);
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @addtogroup TIMEx_Exported_Functions_Group4 Extended Timer Complementary One Pulse functions
|
|
* @brief Timer Complementary One Pulse functions
|
|
* @{
|
|
*/
|
|
/* Timer Complementary One Pulse functions **********************************/
|
|
/* Blocking mode: Polling */
|
|
HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
|
|
HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
|
|
|
|
/* Non-Blocking mode: Interrupt */
|
|
HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
|
|
HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @addtogroup TIMEx_Exported_Functions_Group5 Extended Peripheral Control functions
|
|
* @brief Peripheral Control functions
|
|
* @{
|
|
*/
|
|
/* Extended Control functions ************************************************/
|
|
HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent(TIM_HandleTypeDef *htim, uint32_t InputTrigger,
|
|
uint32_t CommutationSource);
|
|
HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent_IT(TIM_HandleTypeDef *htim, uint32_t InputTrigger,
|
|
uint32_t CommutationSource);
|
|
HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent_DMA(TIM_HandleTypeDef *htim, uint32_t InputTrigger,
|
|
uint32_t CommutationSource);
|
|
HAL_StatusTypeDef HAL_TIMEx_MasterConfigSynchronization(TIM_HandleTypeDef *htim,
|
|
TIM_MasterConfigTypeDef *sMasterConfig);
|
|
HAL_StatusTypeDef HAL_TIMEx_ConfigBreakDeadTime(TIM_HandleTypeDef *htim,
|
|
TIM_BreakDeadTimeConfigTypeDef *sBreakDeadTimeConfig);
|
|
#if defined(TIM_BREAK_INPUT_SUPPORT)
|
|
HAL_StatusTypeDef HAL_TIMEx_ConfigBreakInput(TIM_HandleTypeDef *htim, uint32_t BreakInput,
|
|
TIMEx_BreakInputConfigTypeDef *sBreakInputConfig);
|
|
#endif /* TIM_BREAK_INPUT_SUPPORT */
|
|
HAL_StatusTypeDef HAL_TIMEx_GroupChannel5(TIM_HandleTypeDef *htim, uint32_t Channels);
|
|
HAL_StatusTypeDef HAL_TIMEx_RemapConfig(TIM_HandleTypeDef *htim, uint32_t Remap);
|
|
HAL_StatusTypeDef HAL_TIMEx_TISelection(TIM_HandleTypeDef *htim, uint32_t TISelection, uint32_t Channel);
|
|
#if defined(TIM_BDTR_BKBID)
|
|
|
|
HAL_StatusTypeDef HAL_TIMEx_DisarmBreakInput(TIM_HandleTypeDef *htim, uint32_t BreakInput);
|
|
HAL_StatusTypeDef HAL_TIMEx_ReArmBreakInput(TIM_HandleTypeDef *htim, uint32_t BreakInput);
|
|
#endif /* TIM_BDTR_BKBID */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @addtogroup TIMEx_Exported_Functions_Group6 Extended Callbacks functions
|
|
* @brief Extended Callbacks functions
|
|
* @{
|
|
*/
|
|
/* Extended Callback **********************************************************/
|
|
void HAL_TIMEx_CommutCallback(TIM_HandleTypeDef *htim);
|
|
void HAL_TIMEx_CommutHalfCpltCallback(TIM_HandleTypeDef *htim);
|
|
void HAL_TIMEx_BreakCallback(TIM_HandleTypeDef *htim);
|
|
void HAL_TIMEx_Break2Callback(TIM_HandleTypeDef *htim);
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @addtogroup TIMEx_Exported_Functions_Group7 Extended Peripheral State functions
|
|
* @brief Extended Peripheral State functions
|
|
* @{
|
|
*/
|
|
/* Extended Peripheral State functions ***************************************/
|
|
HAL_TIM_StateTypeDef HAL_TIMEx_HallSensor_GetState(TIM_HandleTypeDef *htim);
|
|
HAL_TIM_ChannelStateTypeDef HAL_TIMEx_GetChannelNState(TIM_HandleTypeDef *htim, uint32_t ChannelN);
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
/* End of exported functions -------------------------------------------------*/
|
|
|
|
/* Private functions----------------------------------------------------------*/
|
|
/** @addtogroup TIMEx_Private_Functions TIM Extended Private Functions
|
|
* @{
|
|
*/
|
|
void TIMEx_DMACommutationCplt(DMA_HandleTypeDef *hdma);
|
|
void TIMEx_DMACommutationHalfCplt(DMA_HandleTypeDef *hdma);
|
|
/**
|
|
* @}
|
|
*/
|
|
/* End of private functions --------------------------------------------------*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
#ifdef __cplusplus
|
|
}
|
|
#endif
|
|
|
|
|
|
#endif /* STM32H7xx_HAL_TIM_EX_H */
|
|
|