5 changed files with 1227 additions and 0 deletions
@ -0,0 +1,890 @@ |
|||||
|
#MicroXplorer Configuration settings - do not modify |
||||
|
ADC2.Channel-0\#ChannelRegularConversion=ADC_CHANNEL_5 |
||||
|
ADC2.ContinuousConvMode=ENABLE |
||||
|
ADC2.DiscontinuousConvMode=DISABLE |
||||
|
ADC2.IPParameters=Rank-0\#ChannelRegularConversion,Channel-0\#ChannelRegularConversion,SamplingTime-0\#ChannelRegularConversion,OffsetNumber-0\#ChannelRegularConversion,OffsetSignedSaturation-0\#ChannelRegularConversion,NbrOfConversionFlag,DiscontinuousConvMode,ContinuousConvMode |
||||
|
ADC2.NbrOfConversionFlag=1 |
||||
|
ADC2.OffsetNumber-0\#ChannelRegularConversion=ADC_OFFSET_NONE |
||||
|
ADC2.OffsetSignedSaturation-0\#ChannelRegularConversion=DISABLE |
||||
|
ADC2.Rank-0\#ChannelRegularConversion=1 |
||||
|
ADC2.SamplingTime-0\#ChannelRegularConversion=ADC_SAMPLETIME_1CYCLE_5 |
||||
|
CORTEX_M7.AccessPermission-Cortex_Memory_Protection_Unit_Region0_Settings=MPU_REGION_FULL_ACCESS |
||||
|
CORTEX_M7.AccessPermission-Cortex_Memory_Protection_Unit_Region1_Settings=MPU_REGION_FULL_ACCESS |
||||
|
CORTEX_M7.AccessPermission-Cortex_Memory_Protection_Unit_Region2_Settings=MPU_REGION_FULL_ACCESS |
||||
|
CORTEX_M7.BaseAddress-Cortex_Memory_Protection_Unit_Region0_Settings=0x30040000 |
||||
|
CORTEX_M7.BaseAddress-Cortex_Memory_Protection_Unit_Region1_Settings=0x30040000 |
||||
|
CORTEX_M7.BaseAddress-Cortex_Memory_Protection_Unit_Region2_Settings=0x30030000 |
||||
|
CORTEX_M7.CPU_DCache=Enabled |
||||
|
CORTEX_M7.CPU_ICache=Enabled |
||||
|
CORTEX_M7.Enable-Cortex_Memory_Protection_Unit_Region0_Settings=MPU_REGION_ENABLE |
||||
|
CORTEX_M7.Enable-Cortex_Memory_Protection_Unit_Region1_Settings=MPU_REGION_ENABLE |
||||
|
CORTEX_M7.Enable-Cortex_Memory_Protection_Unit_Region2_Settings=MPU_REGION_ENABLE |
||||
|
CORTEX_M7.IPParameters=MPU_Control,CPU_ICache,CPU_DCache,Enable-Cortex_Memory_Protection_Unit_Region2_Settings,Enable-Cortex_Memory_Protection_Unit_Region0_Settings,BaseAddress-Cortex_Memory_Protection_Unit_Region0_Settings,Size-Cortex_Memory_Protection_Unit_Region0_Settings,IsBufferable-Cortex_Memory_Protection_Unit_Region0_Settings,AccessPermission-Cortex_Memory_Protection_Unit_Region0_Settings,Enable-Cortex_Memory_Protection_Unit_Region1_Settings,BaseAddress-Cortex_Memory_Protection_Unit_Region1_Settings,Size-Cortex_Memory_Protection_Unit_Region1_Settings,AccessPermission-Cortex_Memory_Protection_Unit_Region1_Settings,IsCacheable-Cortex_Memory_Protection_Unit_Region1_Settings,IsShareable-Cortex_Memory_Protection_Unit_Region1_Settings,TypeExtField-Cortex_Memory_Protection_Unit_Region1_Settings,IsShareable-Cortex_Memory_Protection_Unit_Region0_Settings,SubRegionDisable-Cortex_Memory_Protection_Unit_Region0_Settings,IsBufferable-Cortex_Memory_Protection_Unit_Region1_Settings,TypeExtField-Cortex_Memory_Protection_Unit_Region0_Settings,BaseAddress-Cortex_Memory_Protection_Unit_Region2_Settings,Size-Cortex_Memory_Protection_Unit_Region2_Settings,TypeExtField-Cortex_Memory_Protection_Unit_Region2_Settings,AccessPermission-Cortex_Memory_Protection_Unit_Region2_Settings |
||||
|
CORTEX_M7.IsBufferable-Cortex_Memory_Protection_Unit_Region0_Settings=MPU_ACCESS_NOT_BUFFERABLE |
||||
|
CORTEX_M7.IsBufferable-Cortex_Memory_Protection_Unit_Region1_Settings=MPU_ACCESS_BUFFERABLE |
||||
|
CORTEX_M7.IsCacheable-Cortex_Memory_Protection_Unit_Region1_Settings=MPU_ACCESS_NOT_CACHEABLE |
||||
|
CORTEX_M7.IsShareable-Cortex_Memory_Protection_Unit_Region0_Settings=MPU_ACCESS_NOT_SHAREABLE |
||||
|
CORTEX_M7.IsShareable-Cortex_Memory_Protection_Unit_Region1_Settings=MPU_ACCESS_SHAREABLE |
||||
|
CORTEX_M7.MPU_Control=MPU_PRIVILEGED_DEFAULT |
||||
|
CORTEX_M7.Size-Cortex_Memory_Protection_Unit_Region0_Settings=MPU_REGION_SIZE_32KB |
||||
|
CORTEX_M7.Size-Cortex_Memory_Protection_Unit_Region1_Settings=MPU_REGION_SIZE_1KB |
||||
|
CORTEX_M7.Size-Cortex_Memory_Protection_Unit_Region2_Settings=MPU_REGION_SIZE_32KB |
||||
|
CORTEX_M7.SubRegionDisable-Cortex_Memory_Protection_Unit_Region0_Settings=0x0 |
||||
|
CORTEX_M7.TypeExtField-Cortex_Memory_Protection_Unit_Region0_Settings=MPU_TEX_LEVEL1 |
||||
|
CORTEX_M7.TypeExtField-Cortex_Memory_Protection_Unit_Region1_Settings=MPU_TEX_LEVEL0 |
||||
|
CORTEX_M7.TypeExtField-Cortex_Memory_Protection_Unit_Region2_Settings=MPU_TEX_LEVEL1 |
||||
|
Dma.Request0=UART4_TX |
||||
|
Dma.Request1=USART1_TX |
||||
|
Dma.Request2=UART5_TX |
||||
|
Dma.Request3=USART2_TX |
||||
|
Dma.Request4=USART3_TX |
||||
|
Dma.Request5=USART6_TX |
||||
|
Dma.Request6=UART7_TX |
||||
|
Dma.RequestsNb=7 |
||||
|
Dma.UART4_TX.0.Direction=DMA_MEMORY_TO_PERIPH |
||||
|
Dma.UART4_TX.0.EventEnable=DISABLE |
||||
|
Dma.UART4_TX.0.FIFOMode=DMA_FIFOMODE_ENABLE |
||||
|
Dma.UART4_TX.0.FIFOThreshold=DMA_FIFO_THRESHOLD_FULL |
||||
|
Dma.UART4_TX.0.Instance=DMA1_Stream0 |
||||
|
Dma.UART4_TX.0.MemBurst=DMA_MBURST_SINGLE |
||||
|
Dma.UART4_TX.0.MemDataAlignment=DMA_MDATAALIGN_BYTE |
||||
|
Dma.UART4_TX.0.MemInc=DMA_MINC_ENABLE |
||||
|
Dma.UART4_TX.0.Mode=DMA_NORMAL |
||||
|
Dma.UART4_TX.0.PeriphBurst=DMA_PBURST_SINGLE |
||||
|
Dma.UART4_TX.0.PeriphDataAlignment=DMA_PDATAALIGN_BYTE |
||||
|
Dma.UART4_TX.0.PeriphInc=DMA_PINC_DISABLE |
||||
|
Dma.UART4_TX.0.Polarity=HAL_DMAMUX_REQ_GEN_RISING |
||||
|
Dma.UART4_TX.0.Priority=DMA_PRIORITY_LOW |
||||
|
Dma.UART4_TX.0.RequestNumber=1 |
||||
|
Dma.UART4_TX.0.RequestParameters=Instance,Direction,PeriphInc,MemInc,PeriphDataAlignment,MemDataAlignment,Mode,Priority,FIFOMode,FIFOThreshold,MemBurst,PeriphBurst,SignalID,Polarity,RequestNumber,SyncSignalID,SyncPolarity,SyncEnable,EventEnable,SyncRequestNumber |
||||
|
Dma.UART4_TX.0.SignalID=NONE |
||||
|
Dma.UART4_TX.0.SyncEnable=DISABLE |
||||
|
Dma.UART4_TX.0.SyncPolarity=HAL_DMAMUX_SYNC_NO_EVENT |
||||
|
Dma.UART4_TX.0.SyncRequestNumber=1 |
||||
|
Dma.UART4_TX.0.SyncSignalID=NONE |
||||
|
Dma.UART5_TX.2.Direction=DMA_MEMORY_TO_PERIPH |
||||
|
Dma.UART5_TX.2.EventEnable=DISABLE |
||||
|
Dma.UART5_TX.2.FIFOMode=DMA_FIFOMODE_DISABLE |
||||
|
Dma.UART5_TX.2.Instance=DMA1_Stream3 |
||||
|
Dma.UART5_TX.2.MemDataAlignment=DMA_MDATAALIGN_BYTE |
||||
|
Dma.UART5_TX.2.MemInc=DMA_MINC_ENABLE |
||||
|
Dma.UART5_TX.2.Mode=DMA_NORMAL |
||||
|
Dma.UART5_TX.2.PeriphDataAlignment=DMA_PDATAALIGN_BYTE |
||||
|
Dma.UART5_TX.2.PeriphInc=DMA_PINC_DISABLE |
||||
|
Dma.UART5_TX.2.Polarity=HAL_DMAMUX_REQ_GEN_RISING |
||||
|
Dma.UART5_TX.2.Priority=DMA_PRIORITY_LOW |
||||
|
Dma.UART5_TX.2.RequestNumber=1 |
||||
|
Dma.UART5_TX.2.RequestParameters=Instance,Direction,PeriphInc,MemInc,PeriphDataAlignment,MemDataAlignment,Mode,Priority,FIFOMode,SignalID,Polarity,RequestNumber,SyncSignalID,SyncPolarity,SyncEnable,EventEnable,SyncRequestNumber |
||||
|
Dma.UART5_TX.2.SignalID=NONE |
||||
|
Dma.UART5_TX.2.SyncEnable=DISABLE |
||||
|
Dma.UART5_TX.2.SyncPolarity=HAL_DMAMUX_SYNC_NO_EVENT |
||||
|
Dma.UART5_TX.2.SyncRequestNumber=1 |
||||
|
Dma.UART5_TX.2.SyncSignalID=NONE |
||||
|
Dma.UART7_TX.6.Direction=DMA_MEMORY_TO_PERIPH |
||||
|
Dma.UART7_TX.6.EventEnable=DISABLE |
||||
|
Dma.UART7_TX.6.FIFOMode=DMA_FIFOMODE_DISABLE |
||||
|
Dma.UART7_TX.6.Instance=DMA1_Stream1 |
||||
|
Dma.UART7_TX.6.MemDataAlignment=DMA_MDATAALIGN_BYTE |
||||
|
Dma.UART7_TX.6.MemInc=DMA_MINC_ENABLE |
||||
|
Dma.UART7_TX.6.Mode=DMA_NORMAL |
||||
|
Dma.UART7_TX.6.PeriphDataAlignment=DMA_PDATAALIGN_BYTE |
||||
|
Dma.UART7_TX.6.PeriphInc=DMA_PINC_DISABLE |
||||
|
Dma.UART7_TX.6.Polarity=HAL_DMAMUX_REQ_GEN_RISING |
||||
|
Dma.UART7_TX.6.Priority=DMA_PRIORITY_LOW |
||||
|
Dma.UART7_TX.6.RequestNumber=1 |
||||
|
Dma.UART7_TX.6.RequestParameters=Instance,Direction,PeriphInc,MemInc,PeriphDataAlignment,MemDataAlignment,Mode,Priority,FIFOMode,SignalID,Polarity,RequestNumber,SyncSignalID,SyncPolarity,SyncEnable,EventEnable,SyncRequestNumber |
||||
|
Dma.UART7_TX.6.SignalID=NONE |
||||
|
Dma.UART7_TX.6.SyncEnable=DISABLE |
||||
|
Dma.UART7_TX.6.SyncPolarity=HAL_DMAMUX_SYNC_NO_EVENT |
||||
|
Dma.UART7_TX.6.SyncRequestNumber=1 |
||||
|
Dma.UART7_TX.6.SyncSignalID=NONE |
||||
|
Dma.USART1_TX.1.Direction=DMA_MEMORY_TO_PERIPH |
||||
|
Dma.USART1_TX.1.EventEnable=DISABLE |
||||
|
Dma.USART1_TX.1.FIFOMode=DMA_FIFOMODE_ENABLE |
||||
|
Dma.USART1_TX.1.FIFOThreshold=DMA_FIFO_THRESHOLD_FULL |
||||
|
Dma.USART1_TX.1.Instance=DMA1_Stream2 |
||||
|
Dma.USART1_TX.1.MemBurst=DMA_MBURST_SINGLE |
||||
|
Dma.USART1_TX.1.MemDataAlignment=DMA_MDATAALIGN_BYTE |
||||
|
Dma.USART1_TX.1.MemInc=DMA_MINC_ENABLE |
||||
|
Dma.USART1_TX.1.Mode=DMA_NORMAL |
||||
|
Dma.USART1_TX.1.PeriphBurst=DMA_PBURST_SINGLE |
||||
|
Dma.USART1_TX.1.PeriphDataAlignment=DMA_PDATAALIGN_BYTE |
||||
|
Dma.USART1_TX.1.PeriphInc=DMA_PINC_DISABLE |
||||
|
Dma.USART1_TX.1.Polarity=HAL_DMAMUX_REQ_GEN_RISING |
||||
|
Dma.USART1_TX.1.Priority=DMA_PRIORITY_LOW |
||||
|
Dma.USART1_TX.1.RequestNumber=1 |
||||
|
Dma.USART1_TX.1.RequestParameters=Instance,Direction,PeriphInc,MemInc,PeriphDataAlignment,MemDataAlignment,Mode,Priority,FIFOMode,FIFOThreshold,MemBurst,PeriphBurst,SignalID,Polarity,RequestNumber,SyncSignalID,SyncPolarity,SyncEnable,EventEnable,SyncRequestNumber |
||||
|
Dma.USART1_TX.1.SignalID=NONE |
||||
|
Dma.USART1_TX.1.SyncEnable=DISABLE |
||||
|
Dma.USART1_TX.1.SyncPolarity=HAL_DMAMUX_SYNC_NO_EVENT |
||||
|
Dma.USART1_TX.1.SyncRequestNumber=1 |
||||
|
Dma.USART1_TX.1.SyncSignalID=NONE |
||||
|
Dma.USART2_TX.3.Direction=DMA_MEMORY_TO_PERIPH |
||||
|
Dma.USART2_TX.3.EventEnable=DISABLE |
||||
|
Dma.USART2_TX.3.FIFOMode=DMA_FIFOMODE_DISABLE |
||||
|
Dma.USART2_TX.3.Instance=DMA1_Stream5 |
||||
|
Dma.USART2_TX.3.MemDataAlignment=DMA_MDATAALIGN_BYTE |
||||
|
Dma.USART2_TX.3.MemInc=DMA_MINC_ENABLE |
||||
|
Dma.USART2_TX.3.Mode=DMA_NORMAL |
||||
|
Dma.USART2_TX.3.PeriphDataAlignment=DMA_PDATAALIGN_BYTE |
||||
|
Dma.USART2_TX.3.PeriphInc=DMA_PINC_DISABLE |
||||
|
Dma.USART2_TX.3.Polarity=HAL_DMAMUX_REQ_GEN_RISING |
||||
|
Dma.USART2_TX.3.Priority=DMA_PRIORITY_LOW |
||||
|
Dma.USART2_TX.3.RequestNumber=1 |
||||
|
Dma.USART2_TX.3.RequestParameters=Instance,Direction,PeriphInc,MemInc,PeriphDataAlignment,MemDataAlignment,Mode,Priority,FIFOMode,SignalID,Polarity,RequestNumber,SyncSignalID,SyncPolarity,SyncEnable,EventEnable,SyncRequestNumber |
||||
|
Dma.USART2_TX.3.SignalID=NONE |
||||
|
Dma.USART2_TX.3.SyncEnable=DISABLE |
||||
|
Dma.USART2_TX.3.SyncPolarity=HAL_DMAMUX_SYNC_NO_EVENT |
||||
|
Dma.USART2_TX.3.SyncRequestNumber=1 |
||||
|
Dma.USART2_TX.3.SyncSignalID=NONE |
||||
|
Dma.USART3_TX.4.Direction=DMA_MEMORY_TO_PERIPH |
||||
|
Dma.USART3_TX.4.EventEnable=DISABLE |
||||
|
Dma.USART3_TX.4.FIFOMode=DMA_FIFOMODE_DISABLE |
||||
|
Dma.USART3_TX.4.Instance=DMA1_Stream6 |
||||
|
Dma.USART3_TX.4.MemDataAlignment=DMA_MDATAALIGN_BYTE |
||||
|
Dma.USART3_TX.4.MemInc=DMA_MINC_ENABLE |
||||
|
Dma.USART3_TX.4.Mode=DMA_NORMAL |
||||
|
Dma.USART3_TX.4.PeriphDataAlignment=DMA_PDATAALIGN_BYTE |
||||
|
Dma.USART3_TX.4.PeriphInc=DMA_PINC_DISABLE |
||||
|
Dma.USART3_TX.4.Polarity=HAL_DMAMUX_REQ_GEN_RISING |
||||
|
Dma.USART3_TX.4.Priority=DMA_PRIORITY_LOW |
||||
|
Dma.USART3_TX.4.RequestNumber=1 |
||||
|
Dma.USART3_TX.4.RequestParameters=Instance,Direction,PeriphInc,MemInc,PeriphDataAlignment,MemDataAlignment,Mode,Priority,FIFOMode,SignalID,Polarity,RequestNumber,SyncSignalID,SyncPolarity,SyncEnable,EventEnable,SyncRequestNumber |
||||
|
Dma.USART3_TX.4.SignalID=NONE |
||||
|
Dma.USART3_TX.4.SyncEnable=DISABLE |
||||
|
Dma.USART3_TX.4.SyncPolarity=HAL_DMAMUX_SYNC_NO_EVENT |
||||
|
Dma.USART3_TX.4.SyncRequestNumber=1 |
||||
|
Dma.USART3_TX.4.SyncSignalID=NONE |
||||
|
Dma.USART6_TX.5.Direction=DMA_MEMORY_TO_PERIPH |
||||
|
Dma.USART6_TX.5.EventEnable=DISABLE |
||||
|
Dma.USART6_TX.5.FIFOMode=DMA_FIFOMODE_DISABLE |
||||
|
Dma.USART6_TX.5.Instance=DMA1_Stream7 |
||||
|
Dma.USART6_TX.5.MemDataAlignment=DMA_MDATAALIGN_BYTE |
||||
|
Dma.USART6_TX.5.MemInc=DMA_MINC_ENABLE |
||||
|
Dma.USART6_TX.5.Mode=DMA_NORMAL |
||||
|
Dma.USART6_TX.5.PeriphDataAlignment=DMA_PDATAALIGN_BYTE |
||||
|
Dma.USART6_TX.5.PeriphInc=DMA_PINC_DISABLE |
||||
|
Dma.USART6_TX.5.Polarity=HAL_DMAMUX_REQ_GEN_RISING |
||||
|
Dma.USART6_TX.5.Priority=DMA_PRIORITY_LOW |
||||
|
Dma.USART6_TX.5.RequestNumber=1 |
||||
|
Dma.USART6_TX.5.RequestParameters=Instance,Direction,PeriphInc,MemInc,PeriphDataAlignment,MemDataAlignment,Mode,Priority,FIFOMode,SignalID,Polarity,RequestNumber,SyncSignalID,SyncPolarity,SyncEnable,EventEnable,SyncRequestNumber |
||||
|
Dma.USART6_TX.5.SignalID=NONE |
||||
|
Dma.USART6_TX.5.SyncEnable=DISABLE |
||||
|
Dma.USART6_TX.5.SyncPolarity=HAL_DMAMUX_SYNC_NO_EVENT |
||||
|
Dma.USART6_TX.5.SyncRequestNumber=1 |
||||
|
Dma.USART6_TX.5.SyncSignalID=NONE |
||||
|
ETH.IPParameters=MediaInterface,TxDescAddress,RxDescAddress,RxBuffAddress,RxBuffLen |
||||
|
ETH.MediaInterface=HAL_ETH_RMII_MODE |
||||
|
ETH.RxBuffAddress=0x30040400 |
||||
|
ETH.RxBuffLen=1528 |
||||
|
ETH.RxDescAddress=0x30040000 |
||||
|
ETH.TxDescAddress=0x30040200 |
||||
|
FDCAN1.CalculateBaudRateNominal=500000 |
||||
|
FDCAN1.CalculateTimeBitNominal=2000 |
||||
|
FDCAN1.CalculateTimeQuantumNominal=250.0 |
||||
|
FDCAN1.IPParameters=NominalPrescaler,NominalTimeSeg1,RxFifo0ElmtsNbr,TxFifoQueueElmtsNbr,CalculateTimeQuantumNominal,CalculateTimeBitNominal,CalculateBaudRateNominal |
||||
|
FDCAN1.NominalPrescaler=10 |
||||
|
FDCAN1.NominalTimeSeg1=5 |
||||
|
FDCAN1.RxFifo0ElmtsNbr=32 |
||||
|
FDCAN1.TxFifoQueueElmtsNbr=32 |
||||
|
FDCAN2.CalculateBaudRateNominal=250000 |
||||
|
FDCAN2.CalculateTimeBitNominal=4000 |
||||
|
FDCAN2.CalculateTimeQuantumNominal=500.0 |
||||
|
FDCAN2.IPParameters=NominalPrescaler,NominalTimeSeg1,RxFifo0ElmtsNbr,TxFifoQueueElmtsNbr,CalculateTimeQuantumNominal,CalculateTimeBitNominal,CalculateBaudRateNominal |
||||
|
FDCAN2.NominalPrescaler=20 |
||||
|
FDCAN2.NominalTimeSeg1=5 |
||||
|
FDCAN2.RxFifo0ElmtsNbr=32 |
||||
|
FDCAN2.TxFifoQueueElmtsNbr=32 |
||||
|
File.Version=6 |
||||
|
GPIO.groupedBy=Group By Peripherals |
||||
|
I2C4.IPParameters=Timing |
||||
|
I2C4.Timing=0x10C0ECFF |
||||
|
KeepUserPlacement=false |
||||
|
LPUART1.BaudRate=57600 |
||||
|
LPUART1.IPParameters=BaudRate,OverrunDisableParam |
||||
|
LPUART1.OverrunDisableParam=UART_ADVFEATURE_OVERRUN_DISABLE |
||||
|
LWIP.BSP.number=1 |
||||
|
LWIP.GATEWAY_ADDRESS=192.168.001.001 |
||||
|
LWIP.IPParameters=LWIP_NETIF_STATUS_CALLBACK,LWIP_DHCP,IP_ADDRESS,NETMASK_ADDRESS,GATEWAY_ADDRESS,MEM_SIZE,LWIP_RAM_HEAP_POINTER |
||||
|
LWIP.IP_ADDRESS=192.168.001.100 |
||||
|
LWIP.LWIP_DHCP=0 |
||||
|
LWIP.LWIP_NETIF_STATUS_CALLBACK=1 |
||||
|
LWIP.LWIP_RAM_HEAP_POINTER=0x30044000 |
||||
|
LWIP.MEM_SIZE=1600 |
||||
|
LWIP.NETMASK_ADDRESS=255.255.255.000 |
||||
|
LWIP.Version=v2.1.2_Cube |
||||
|
LWIP0.BSP.STBoard=false |
||||
|
LWIP0.BSP.api=BSP_COMPONENT_DRIVER |
||||
|
LWIP0.BSP.component=LAN8742 |
||||
|
LWIP0.BSP.condition= |
||||
|
LWIP0.BSP.instance=LAN8742 |
||||
|
LWIP0.BSP.ip= |
||||
|
LWIP0.BSP.mode= |
||||
|
LWIP0.BSP.name=Driver_PHY |
||||
|
LWIP0.BSP.semaphore=S_LAN8742 |
||||
|
LWIP0.BSP.solution=LAN8742 |
||||
|
Mcu.CPN=STM32H743VGT6 |
||||
|
Mcu.Family=STM32H7 |
||||
|
Mcu.IP0=ADC2 |
||||
|
Mcu.IP1=CORTEX_M7 |
||||
|
Mcu.IP10=NVIC |
||||
|
Mcu.IP11=QUADSPI |
||||
|
Mcu.IP12=RCC |
||||
|
Mcu.IP13=SYS |
||||
|
Mcu.IP14=TIM1 |
||||
|
Mcu.IP15=TIM8 |
||||
|
Mcu.IP16=UART4 |
||||
|
Mcu.IP17=UART5 |
||||
|
Mcu.IP18=UART7 |
||||
|
Mcu.IP19=USART1 |
||||
|
Mcu.IP2=DEBUG |
||||
|
Mcu.IP20=USART2 |
||||
|
Mcu.IP21=USART3 |
||||
|
Mcu.IP22=USART6 |
||||
|
Mcu.IP3=DMA |
||||
|
Mcu.IP4=ETH |
||||
|
Mcu.IP5=FDCAN1 |
||||
|
Mcu.IP6=FDCAN2 |
||||
|
Mcu.IP7=I2C4 |
||||
|
Mcu.IP8=LPUART1 |
||||
|
Mcu.IP9=LWIP |
||||
|
Mcu.IPNb=23 |
||||
|
Mcu.Name=STM32H743VGTx |
||||
|
Mcu.Package=LQFP100 |
||||
|
Mcu.Pin0=PE2 |
||||
|
Mcu.Pin1=PE3 |
||||
|
Mcu.Pin10=PC2_C |
||||
|
Mcu.Pin11=PC3_C |
||||
|
Mcu.Pin12=PA0 |
||||
|
Mcu.Pin13=PA1 |
||||
|
Mcu.Pin14=PA2 |
||||
|
Mcu.Pin15=PA3 |
||||
|
Mcu.Pin16=PA4 |
||||
|
Mcu.Pin17=PA5 |
||||
|
Mcu.Pin18=PA6 |
||||
|
Mcu.Pin19=PA7 |
||||
|
Mcu.Pin2=PE4 |
||||
|
Mcu.Pin20=PC4 |
||||
|
Mcu.Pin21=PC5 |
||||
|
Mcu.Pin22=PB1 |
||||
|
Mcu.Pin23=PB2 |
||||
|
Mcu.Pin24=PE7 |
||||
|
Mcu.Pin25=PE8 |
||||
|
Mcu.Pin26=PE9 |
||||
|
Mcu.Pin27=PE10 |
||||
|
Mcu.Pin28=PE11 |
||||
|
Mcu.Pin29=PE12 |
||||
|
Mcu.Pin3=PE5 |
||||
|
Mcu.Pin30=PE13 |
||||
|
Mcu.Pin31=PB11 |
||||
|
Mcu.Pin32=PB12 |
||||
|
Mcu.Pin33=PB13 |
||||
|
Mcu.Pin34=PB14 |
||||
|
Mcu.Pin35=PB15 |
||||
|
Mcu.Pin36=PD8 |
||||
|
Mcu.Pin37=PD9 |
||||
|
Mcu.Pin38=PD10 |
||||
|
Mcu.Pin39=PD11 |
||||
|
Mcu.Pin4=PE6 |
||||
|
Mcu.Pin40=PD12 |
||||
|
Mcu.Pin41=PD13 |
||||
|
Mcu.Pin42=PD14 |
||||
|
Mcu.Pin43=PC6 |
||||
|
Mcu.Pin44=PC7 |
||||
|
Mcu.Pin45=PC8 |
||||
|
Mcu.Pin46=PC9 |
||||
|
Mcu.Pin47=PA8 |
||||
|
Mcu.Pin48=PA9 |
||||
|
Mcu.Pin49=PA10 |
||||
|
Mcu.Pin5=PC13 |
||||
|
Mcu.Pin50=PA11 |
||||
|
Mcu.Pin51=PA12 |
||||
|
Mcu.Pin52=PA13 (JTMS/SWDIO) |
||||
|
Mcu.Pin53=PA14 (JTCK/SWCLK) |
||||
|
Mcu.Pin54=PA15 (JTDI) |
||||
|
Mcu.Pin55=PC10 |
||||
|
Mcu.Pin56=PC11 |
||||
|
Mcu.Pin57=PC12 |
||||
|
Mcu.Pin58=PD0 |
||||
|
Mcu.Pin59=PD1 |
||||
|
Mcu.Pin6=PH0-OSC_IN (PH0) |
||||
|
Mcu.Pin60=PD2 |
||||
|
Mcu.Pin61=PD3 |
||||
|
Mcu.Pin62=PD4 |
||||
|
Mcu.Pin63=PD5 |
||||
|
Mcu.Pin64=PD6 |
||||
|
Mcu.Pin65=PB3 (JTDO/TRACESWO) |
||||
|
Mcu.Pin66=PB4 (NJTRST) |
||||
|
Mcu.Pin67=PB5 |
||||
|
Mcu.Pin68=PB6 |
||||
|
Mcu.Pin69=PB7 |
||||
|
Mcu.Pin7=PH1-OSC_OUT (PH1) |
||||
|
Mcu.Pin70=PB8 |
||||
|
Mcu.Pin71=PB9 |
||||
|
Mcu.Pin72=PE0 |
||||
|
Mcu.Pin73=PE1 |
||||
|
Mcu.Pin74=VP_LWIP_VS_Enabled |
||||
|
Mcu.Pin75=VP_SYS_VS_Systick |
||||
|
Mcu.Pin76=VP_TIM1_VS_ClockSourceINT |
||||
|
Mcu.Pin77=VP_TIM8_VS_ClockSourceINT |
||||
|
Mcu.Pin8=PC0 |
||||
|
Mcu.Pin9=PC1 |
||||
|
Mcu.PinsNb=78 |
||||
|
Mcu.ThirdPartyNb=0 |
||||
|
Mcu.UserConstants= |
||||
|
Mcu.UserName=STM32H743VGTx |
||||
|
MxCube.Version=6.6.1 |
||||
|
MxDb.Version=DB.6.0.60 |
||||
|
NVIC.BusFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false |
||||
|
NVIC.DMA1_Stream0_IRQn=true\:0\:0\:false\:false\:true\:false\:true\:true |
||||
|
NVIC.DMA1_Stream1_IRQn=true\:0\:0\:false\:false\:true\:false\:true\:true |
||||
|
NVIC.DMA1_Stream2_IRQn=true\:0\:0\:false\:false\:true\:false\:true\:true |
||||
|
NVIC.DMA1_Stream3_IRQn=true\:0\:0\:false\:false\:true\:false\:true\:true |
||||
|
NVIC.DMA1_Stream5_IRQn=true\:0\:0\:false\:false\:true\:false\:true\:true |
||||
|
NVIC.DMA1_Stream6_IRQn=true\:0\:0\:false\:false\:true\:false\:true\:true |
||||
|
NVIC.DMA1_Stream7_IRQn=true\:0\:0\:false\:false\:true\:false\:true\:true |
||||
|
NVIC.DebugMonitor_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false |
||||
|
NVIC.ETH_IRQn=true\:6\:0\:true\:false\:true\:true\:true\:true |
||||
|
NVIC.ETH_WKUP_IRQn=true\:0\:0\:false\:false\:true\:true\:true\:true |
||||
|
NVIC.FDCAN1_IT0_IRQn=true\:0\:0\:false\:false\:true\:true\:true\:true |
||||
|
NVIC.FDCAN2_IT0_IRQn=true\:0\:0\:false\:false\:true\:true\:true\:true |
||||
|
NVIC.ForceEnableDMAVector=true |
||||
|
NVIC.HardFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false |
||||
|
NVIC.I2C4_ER_IRQn=true\:15\:0\:true\:false\:true\:true\:true\:true |
||||
|
NVIC.I2C4_EV_IRQn=true\:15\:0\:true\:false\:true\:true\:true\:true |
||||
|
NVIC.LPUART1_IRQn=true\:0\:0\:false\:false\:true\:true\:true\:true |
||||
|
NVIC.MemoryManagement_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false |
||||
|
NVIC.NonMaskableInt_IRQn=true\:0\:0\:false\:false\:true\:false\:true\:false |
||||
|
NVIC.PendSV_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false |
||||
|
NVIC.PriorityGroup=NVIC_PRIORITYGROUP_4 |
||||
|
NVIC.SVCall_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false |
||||
|
NVIC.SysTick_IRQn=true\:15\:0\:false\:false\:true\:false\:true\:false |
||||
|
NVIC.TIM1_UP_IRQn=true\:0\:0\:false\:false\:true\:true\:true\:true |
||||
|
NVIC.TIM8_UP_TIM13_IRQn=true\:0\:0\:false\:false\:true\:true\:true\:true |
||||
|
NVIC.UART4_IRQn=true\:0\:0\:false\:false\:true\:true\:true\:true |
||||
|
NVIC.UART5_IRQn=true\:0\:0\:false\:false\:true\:true\:true\:true |
||||
|
NVIC.UART7_IRQn=true\:0\:0\:false\:false\:true\:true\:true\:true |
||||
|
NVIC.USART1_IRQn=true\:0\:0\:false\:false\:true\:true\:true\:true |
||||
|
NVIC.USART2_IRQn=true\:0\:0\:false\:false\:true\:true\:true\:true |
||||
|
NVIC.USART3_IRQn=true\:0\:0\:false\:false\:true\:true\:true\:true |
||||
|
NVIC.USART6_IRQn=true\:0\:0\:false\:false\:true\:true\:true\:true |
||||
|
NVIC.UsageFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false |
||||
|
PA0.GPIOParameters=PinState,GPIO_Label,PinAttribute |
||||
|
PA0.GPIO_Label=OUT_2 |
||||
|
PA0.Locked=true |
||||
|
PA0.PinAttribute=Free |
||||
|
PA0.PinState=GPIO_PIN_SET |
||||
|
PA0.Signal=GPIO_Output |
||||
|
PA1.GPIOParameters=GPIO_Speed,PinAttribute |
||||
|
PA1.GPIO_Speed=GPIO_SPEED_FREQ_VERY_HIGH |
||||
|
PA1.Mode=RMII |
||||
|
PA1.PinAttribute=Free |
||||
|
PA1.Signal=ETH_REF_CLK |
||||
|
PA10.Mode=Asynchronous |
||||
|
PA10.Signal=LPUART1_RX |
||||
|
PA11.GPIOParameters=GPIO_Speed,GPIO_PuPd,PinAttribute |
||||
|
PA11.GPIO_PuPd=GPIO_PULLUP |
||||
|
PA11.GPIO_Speed=GPIO_SPEED_FREQ_VERY_HIGH |
||||
|
PA11.Locked=true |
||||
|
PA11.Mode=Asynchronous |
||||
|
PA11.PinAttribute=Free |
||||
|
PA11.Signal=UART4_RX |
||||
|
PA12.GPIOParameters=PinAttribute |
||||
|
PA12.Locked=true |
||||
|
PA12.Mode=Asynchronous |
||||
|
PA12.PinAttribute=Free |
||||
|
PA12.Signal=UART4_TX |
||||
|
PA13\ (JTMS/SWDIO).GPIOParameters=PinAttribute |
||||
|
PA13\ (JTMS/SWDIO).Locked=true |
||||
|
PA13\ (JTMS/SWDIO).Mode=Serial_Wire |
||||
|
PA13\ (JTMS/SWDIO).PinAttribute=Free |
||||
|
PA13\ (JTMS/SWDIO).Signal=DEBUG_JTMS-SWDIO |
||||
|
PA14\ (JTCK/SWCLK).GPIOParameters=PinAttribute |
||||
|
PA14\ (JTCK/SWCLK).Mode=Serial_Wire |
||||
|
PA14\ (JTCK/SWCLK).PinAttribute=Free |
||||
|
PA14\ (JTCK/SWCLK).Signal=DEBUG_JTCK-SWCLK |
||||
|
PA15\ (JTDI).GPIOParameters=PinAttribute |
||||
|
PA15\ (JTDI).Locked=true |
||||
|
PA15\ (JTDI).Mode=Asynchronous |
||||
|
PA15\ (JTDI).PinAttribute=Free |
||||
|
PA15\ (JTDI).Signal=UART7_TX |
||||
|
PA2.GPIOParameters=GPIO_Speed,PinAttribute |
||||
|
PA2.GPIO_Speed=GPIO_SPEED_FREQ_VERY_HIGH |
||||
|
PA2.Mode=RMII |
||||
|
PA2.PinAttribute=Free |
||||
|
PA2.Signal=ETH_MDIO |
||||
|
PA3.GPIOParameters=PinState,GPIO_Label,PinAttribute |
||||
|
PA3.GPIO_Label=OUT_3 |
||||
|
PA3.Locked=true |
||||
|
PA3.PinAttribute=Free |
||||
|
PA3.PinState=GPIO_PIN_SET |
||||
|
PA3.Signal=GPIO_Output |
||||
|
PA4.GPIOParameters=PinState,GPIO_Label,PinAttribute |
||||
|
PA4.GPIO_Label=OUT_4 |
||||
|
PA4.Locked=true |
||||
|
PA4.PinAttribute=Free |
||||
|
PA4.PinState=GPIO_PIN_SET |
||||
|
PA4.Signal=GPIO_Output |
||||
|
PA5.GPIOParameters=PinState,GPIO_Label,PinAttribute |
||||
|
PA5.GPIO_Label=OUT_5 |
||||
|
PA5.Locked=true |
||||
|
PA5.PinAttribute=Free |
||||
|
PA5.PinState=GPIO_PIN_SET |
||||
|
PA5.Signal=GPIO_Output |
||||
|
PA6.GPIOParameters=GPIO_Label,PinAttribute |
||||
|
PA6.GPIO_Label=ETH_RST |
||||
|
PA6.Locked=true |
||||
|
PA6.PinAttribute=Free |
||||
|
PA6.Signal=GPIO_Output |
||||
|
PA7.GPIOParameters=GPIO_Speed,PinAttribute |
||||
|
PA7.GPIO_Speed=GPIO_SPEED_FREQ_VERY_HIGH |
||||
|
PA7.Mode=RMII |
||||
|
PA7.PinAttribute=Free |
||||
|
PA7.Signal=ETH_CRS_DV |
||||
|
PA8.GPIOParameters=GPIO_Speed,GPIO_PuPd,PinAttribute |
||||
|
PA8.GPIO_PuPd=GPIO_PULLUP |
||||
|
PA8.GPIO_Speed=GPIO_SPEED_FREQ_VERY_HIGH |
||||
|
PA8.Locked=true |
||||
|
PA8.Mode=Asynchronous |
||||
|
PA8.PinAttribute=Free |
||||
|
PA8.Signal=UART7_RX |
||||
|
PA9.Mode=Asynchronous |
||||
|
PA9.Signal=LPUART1_TX |
||||
|
PB1.Locked=true |
||||
|
PB1.Signal=ADCx_INP5 |
||||
|
PB11.GPIOParameters=GPIO_Speed,PinAttribute |
||||
|
PB11.GPIO_Speed=GPIO_SPEED_FREQ_VERY_HIGH |
||||
|
PB11.Mode=RMII |
||||
|
PB11.PinAttribute=Free |
||||
|
PB11.Signal=ETH_TX_EN |
||||
|
PB12.GPIOParameters=GPIO_Speed,PinAttribute |
||||
|
PB12.GPIO_Speed=GPIO_SPEED_FREQ_VERY_HIGH |
||||
|
PB12.Mode=RMII |
||||
|
PB12.PinAttribute=Free |
||||
|
PB12.Signal=ETH_TXD0 |
||||
|
PB13.GPIOParameters=GPIO_Speed,PinAttribute |
||||
|
PB13.GPIO_Speed=GPIO_SPEED_FREQ_VERY_HIGH |
||||
|
PB13.Mode=RMII |
||||
|
PB13.PinAttribute=Free |
||||
|
PB13.Signal=ETH_TXD1 |
||||
|
PB14.GPIOParameters=PinAttribute |
||||
|
PB14.Locked=true |
||||
|
PB14.Mode=Asynchronous |
||||
|
PB14.PinAttribute=Free |
||||
|
PB14.Signal=USART1_TX |
||||
|
PB15.GPIOParameters=GPIO_Speed,GPIO_PuPd,PinAttribute |
||||
|
PB15.GPIO_PuPd=GPIO_PULLUP |
||||
|
PB15.GPIO_Speed=GPIO_SPEED_FREQ_VERY_HIGH |
||||
|
PB15.Mode=Asynchronous |
||||
|
PB15.PinAttribute=Free |
||||
|
PB15.Signal=USART1_RX |
||||
|
PB2.GPIOParameters=GPIO_Speed,PinAttribute |
||||
|
PB2.GPIO_Speed=GPIO_SPEED_FREQ_VERY_HIGH |
||||
|
PB2.Mode=Single Bank 2 |
||||
|
PB2.PinAttribute=Free |
||||
|
PB2.Signal=QUADSPI_CLK |
||||
|
PB3\ (JTDO/TRACESWO).GPIOParameters=GPIO_Label |
||||
|
PB3\ (JTDO/TRACESWO).GPIO_Label=S0_NET |
||||
|
PB3\ (JTDO/TRACESWO).Locked=true |
||||
|
PB3\ (JTDO/TRACESWO).Signal=GPIO_Input |
||||
|
PB4\ (NJTRST).GPIOParameters=GPIO_Label |
||||
|
PB4\ (NJTRST).GPIO_Label=S0_LINKA |
||||
|
PB4\ (NJTRST).Locked=true |
||||
|
PB4\ (NJTRST).Signal=GPIO_Input |
||||
|
PB5.Locked=true |
||||
|
PB5.Mode=FDCAN_Activate |
||||
|
PB5.Signal=FDCAN2_RX |
||||
|
PB6.Locked=true |
||||
|
PB6.Mode=FDCAN_Activate |
||||
|
PB6.Signal=FDCAN2_TX |
||||
|
PB7.GPIOParameters=GPIO_Label |
||||
|
PB7.GPIO_Label=E22_M1 |
||||
|
PB7.Locked=true |
||||
|
PB7.Signal=GPIO_Output |
||||
|
PB8.Locked=true |
||||
|
PB8.Mode=FDCAN_Activate |
||||
|
PB8.Signal=FDCAN1_RX |
||||
|
PB9.Locked=true |
||||
|
PB9.Mode=FDCAN_Activate |
||||
|
PB9.Signal=FDCAN1_TX |
||||
|
PC0.GPIOParameters=GPIO_Label |
||||
|
PC0.GPIO_Label=S0_RESET |
||||
|
PC0.Locked=true |
||||
|
PC0.Signal=GPIO_Output |
||||
|
PC1.GPIOParameters=GPIO_Speed |
||||
|
PC1.GPIO_Speed=GPIO_SPEED_FREQ_VERY_HIGH |
||||
|
PC1.Mode=RMII |
||||
|
PC1.Signal=ETH_MDC |
||||
|
PC10.GPIOParameters=GPIO_Label,PinAttribute |
||||
|
PC10.GPIO_Label=E22_RST |
||||
|
PC10.Locked=true |
||||
|
PC10.PinAttribute=Free |
||||
|
PC10.Signal=GPIO_Output |
||||
|
PC11.GPIOParameters=GPIO_Speed |
||||
|
PC11.GPIO_Speed=GPIO_SPEED_FREQ_VERY_HIGH |
||||
|
PC11.Mode=Single Bank 2 |
||||
|
PC11.Signal=QUADSPI_BK2_NCS |
||||
|
PC12.Locked=true |
||||
|
PC12.Mode=Asynchronous |
||||
|
PC12.Signal=UART5_TX |
||||
|
PC13.GPIOParameters=GPIO_Label |
||||
|
PC13.GPIO_Label=IN_5 |
||||
|
PC13.Locked=true |
||||
|
PC13.Signal=GPIO_Input |
||||
|
PC2_C.GPIOParameters=PinState,GPIO_Label,PinAttribute |
||||
|
PC2_C.GPIO_Label=OUT_0 |
||||
|
PC2_C.Locked=true |
||||
|
PC2_C.PinAttribute=Free |
||||
|
PC2_C.PinState=GPIO_PIN_SET |
||||
|
PC2_C.Signal=GPIO_Output |
||||
|
PC3_C.GPIOParameters=PinState,GPIO_Label,PinAttribute |
||||
|
PC3_C.GPIO_Label=OUT_1 |
||||
|
PC3_C.Locked=true |
||||
|
PC3_C.PinAttribute=Free |
||||
|
PC3_C.PinState=GPIO_PIN_SET |
||||
|
PC3_C.Signal=GPIO_Output |
||||
|
PC4.GPIOParameters=GPIO_Speed,PinAttribute |
||||
|
PC4.GPIO_Speed=GPIO_SPEED_FREQ_VERY_HIGH |
||||
|
PC4.Mode=RMII |
||||
|
PC4.PinAttribute=Free |
||||
|
PC4.Signal=ETH_RXD0 |
||||
|
PC5.GPIOParameters=GPIO_Speed,PinAttribute |
||||
|
PC5.GPIO_Speed=GPIO_SPEED_FREQ_VERY_HIGH |
||||
|
PC5.Mode=RMII |
||||
|
PC5.PinAttribute=Free |
||||
|
PC5.Signal=ETH_RXD1 |
||||
|
PC6.GPIOParameters=PinAttribute |
||||
|
PC6.Mode=Asynchronous |
||||
|
PC6.PinAttribute=Free |
||||
|
PC6.Signal=USART6_TX |
||||
|
PC7.GPIOParameters=GPIO_Speed,GPIO_PuPd,PinAttribute |
||||
|
PC7.GPIO_PuPd=GPIO_PULLUP |
||||
|
PC7.GPIO_Speed=GPIO_SPEED_FREQ_VERY_HIGH |
||||
|
PC7.Mode=Asynchronous |
||||
|
PC7.PinAttribute=Free |
||||
|
PC7.Signal=USART6_RX |
||||
|
PC8.GPIOParameters=GPIO_Label,PinAttribute |
||||
|
PC8.GPIO_Label=RS485_3_DIR |
||||
|
PC8.Locked=true |
||||
|
PC8.PinAttribute=Free |
||||
|
PC8.Signal=GPIO_Output |
||||
|
PC9.GPIOParameters=GPIO_Label,PinAttribute |
||||
|
PC9.GPIO_Label=RS485_4_DIR |
||||
|
PC9.Locked=true |
||||
|
PC9.PinAttribute=Free |
||||
|
PC9.Signal=GPIO_Output |
||||
|
PD0.GPIOParameters=GPIO_Label |
||||
|
PD0.GPIO_Label=E28_M0 |
||||
|
PD0.Locked=true |
||||
|
PD0.Signal=GPIO_Output |
||||
|
PD1.GPIOParameters=GPIO_Label |
||||
|
PD1.GPIO_Label=E28_M1 |
||||
|
PD1.Locked=true |
||||
|
PD1.Signal=GPIO_Output |
||||
|
PD10.GPIOParameters=GPIO_Label,PinAttribute |
||||
|
PD10.GPIO_Label=RS485_1_DIR |
||||
|
PD10.Locked=true |
||||
|
PD10.PinAttribute=Free |
||||
|
PD10.Signal=GPIO_Output |
||||
|
PD11.GPIOParameters=GPIO_Label,PinAttribute |
||||
|
PD11.GPIO_Label=RS485_2_DIR |
||||
|
PD11.Locked=true |
||||
|
PD11.PinAttribute=Free |
||||
|
PD11.Signal=GPIO_Output |
||||
|
PD12.GPIOParameters=PinAttribute |
||||
|
PD12.Mode=I2C |
||||
|
PD12.PinAttribute=Free |
||||
|
PD12.Signal=I2C4_SCL |
||||
|
PD13.GPIOParameters=PinAttribute |
||||
|
PD13.Mode=I2C |
||||
|
PD13.PinAttribute=Free |
||||
|
PD13.Signal=I2C4_SDA |
||||
|
PD14.GPIOParameters=PinAttribute |
||||
|
PD14.Locked=true |
||||
|
PD14.PinAttribute=Free |
||||
|
PD14.Signal=GPXTI14 |
||||
|
PD2.GPIOParameters=GPIO_Speed,GPIO_PuPd |
||||
|
PD2.GPIO_PuPd=GPIO_PULLUP |
||||
|
PD2.GPIO_Speed=GPIO_SPEED_FREQ_VERY_HIGH |
||||
|
PD2.Locked=true |
||||
|
PD2.Mode=Asynchronous |
||||
|
PD2.Signal=UART5_RX |
||||
|
PD3.GPIOParameters=GPIO_Label |
||||
|
PD3.GPIO_Label=E28_M2 |
||||
|
PD3.Locked=true |
||||
|
PD3.Signal=GPIO_Output |
||||
|
PD4.GPIOParameters=GPIO_Label |
||||
|
PD4.GPIO_Label=E28_AUX |
||||
|
PD4.Locked=true |
||||
|
PD4.Signal=GPXTI4 |
||||
|
PD5.Locked=true |
||||
|
PD5.Mode=Asynchronous |
||||
|
PD5.Signal=USART2_TX |
||||
|
PD6.GPIOParameters=GPIO_Speed,GPIO_PuPd |
||||
|
PD6.GPIO_PuPd=GPIO_PULLUP |
||||
|
PD6.GPIO_Speed=GPIO_SPEED_FREQ_VERY_HIGH |
||||
|
PD6.Locked=true |
||||
|
PD6.Mode=Asynchronous |
||||
|
PD6.Signal=USART2_RX |
||||
|
PD8.GPIOParameters=PinAttribute |
||||
|
PD8.Locked=true |
||||
|
PD8.Mode=Asynchronous |
||||
|
PD8.PinAttribute=Free |
||||
|
PD8.Signal=USART3_TX |
||||
|
PD9.GPIOParameters=GPIO_Speed,GPIO_PuPd,PinAttribute |
||||
|
PD9.GPIO_PuPd=GPIO_PULLUP |
||||
|
PD9.GPIO_Speed=GPIO_SPEED_FREQ_VERY_HIGH |
||||
|
PD9.Mode=Asynchronous |
||||
|
PD9.PinAttribute=Free |
||||
|
PD9.Signal=USART3_RX |
||||
|
PE0.GPIOParameters=GPIO_Label |
||||
|
PE0.GPIO_Label=E22_M0 |
||||
|
PE0.Locked=true |
||||
|
PE0.Signal=GPIO_Output |
||||
|
PE1.GPIOParameters=GPIO_Label |
||||
|
PE1.GPIO_Label=E22_AUX |
||||
|
PE1.Locked=true |
||||
|
PE1.Signal=GPXTI1 |
||||
|
PE10.GPIOParameters=GPIO_Speed,PinAttribute |
||||
|
PE10.GPIO_Speed=GPIO_SPEED_FREQ_VERY_HIGH |
||||
|
PE10.Mode=Single Bank 2 |
||||
|
PE10.PinAttribute=Free |
||||
|
PE10.Signal=QUADSPI_BK2_IO3 |
||||
|
PE11.GPIOParameters=GPIO_Label,PinAttribute |
||||
|
PE11.GPIO_Label=EEPROM_WP |
||||
|
PE11.Locked=true |
||||
|
PE11.PinAttribute=Free |
||||
|
PE11.Signal=GPIO_Output |
||||
|
PE12.GPIOParameters=GPIO_Label,PinAttribute |
||||
|
PE12.GPIO_Label=EEPROM_SCL |
||||
|
PE12.Locked=true |
||||
|
PE12.PinAttribute=Free |
||||
|
PE12.Signal=GPIO_Output |
||||
|
PE13.GPIOParameters=GPIO_Label,PinAttribute |
||||
|
PE13.GPIO_Label=EEPROM_SDA |
||||
|
PE13.Locked=true |
||||
|
PE13.PinAttribute=Free |
||||
|
PE13.Signal=GPIO_Input |
||||
|
PE2.GPIOParameters=GPIO_Label |
||||
|
PE2.GPIO_Label=IN_0 |
||||
|
PE2.Locked=true |
||||
|
PE2.Signal=GPIO_Input |
||||
|
PE3.GPIOParameters=GPIO_Label |
||||
|
PE3.GPIO_Label=IN_1 |
||||
|
PE3.Locked=true |
||||
|
PE3.Signal=GPIO_Input |
||||
|
PE4.GPIOParameters=GPIO_Label |
||||
|
PE4.GPIO_Label=IN_2 |
||||
|
PE4.Locked=true |
||||
|
PE4.Signal=GPIO_Input |
||||
|
PE5.GPIOParameters=GPIO_Label |
||||
|
PE5.GPIO_Label=IN_3 |
||||
|
PE5.Locked=true |
||||
|
PE5.Signal=GPIO_Input |
||||
|
PE6.GPIOParameters=GPIO_Label |
||||
|
PE6.GPIO_Label=IN_4 |
||||
|
PE6.Locked=true |
||||
|
PE6.Signal=GPIO_Input |
||||
|
PE7.GPIOParameters=GPIO_Speed,PinAttribute |
||||
|
PE7.GPIO_Speed=GPIO_SPEED_FREQ_VERY_HIGH |
||||
|
PE7.Mode=Single Bank 2 |
||||
|
PE7.PinAttribute=Free |
||||
|
PE7.Signal=QUADSPI_BK2_IO0 |
||||
|
PE8.GPIOParameters=GPIO_Speed,PinAttribute |
||||
|
PE8.GPIO_Speed=GPIO_SPEED_FREQ_VERY_HIGH |
||||
|
PE8.Mode=Single Bank 2 |
||||
|
PE8.PinAttribute=Free |
||||
|
PE8.Signal=QUADSPI_BK2_IO1 |
||||
|
PE9.GPIOParameters=GPIO_Speed,PinAttribute |
||||
|
PE9.GPIO_Speed=GPIO_SPEED_FREQ_VERY_HIGH |
||||
|
PE9.Mode=Single Bank 2 |
||||
|
PE9.PinAttribute=Free |
||||
|
PE9.Signal=QUADSPI_BK2_IO2 |
||||
|
PH0-OSC_IN\ (PH0).Mode=HSE-External-Oscillator |
||||
|
PH0-OSC_IN\ (PH0).Signal=RCC_OSC_IN |
||||
|
PH1-OSC_OUT\ (PH1).Mode=HSE-External-Oscillator |
||||
|
PH1-OSC_OUT\ (PH1).Signal=RCC_OSC_OUT |
||||
|
PinOutPanel.RotationAngle=0 |
||||
|
ProjectManager.AskForMigrate=true |
||||
|
ProjectManager.BackupPrevious=false |
||||
|
ProjectManager.CompilerOptimize=6 |
||||
|
ProjectManager.ComputerToolchain=false |
||||
|
ProjectManager.CoupleFile=true |
||||
|
ProjectManager.CustomerFirmwarePackage= |
||||
|
ProjectManager.DefaultFWLocation=true |
||||
|
ProjectManager.DeletePrevious=true |
||||
|
ProjectManager.DeviceId=STM32H743VGTx |
||||
|
ProjectManager.FirmwarePackage=STM32Cube FW_H7 V1.11.2 |
||||
|
ProjectManager.FreePins=false |
||||
|
ProjectManager.HalAssertFull=false |
||||
|
ProjectManager.HeapSize=0x400 |
||||
|
ProjectManager.KeepUserCode=true |
||||
|
ProjectManager.LastFirmware=true |
||||
|
ProjectManager.LibraryCopy=1 |
||||
|
ProjectManager.MainLocation=Core/Src |
||||
|
ProjectManager.NoMain=false |
||||
|
ProjectManager.PreviousToolchain=STM32CubeIDE |
||||
|
ProjectManager.ProjectBuild=false |
||||
|
ProjectManager.ProjectFileName=BHBF_NewFiveWheel3.0.ioc |
||||
|
ProjectManager.ProjectName=BHBF_NewFiveWheel3.0 |
||||
|
ProjectManager.RegisterCallBack= |
||||
|
ProjectManager.StackSize=0x1000 |
||||
|
ProjectManager.TargetToolchain=STM32CubeIDE |
||||
|
ProjectManager.ToolChainLocation= |
||||
|
ProjectManager.UnderRoot=true |
||||
|
ProjectManager.functionlistsort=1-SystemClock_Config-RCC-false-HAL-false,2-MX_GPIO_Init-GPIO-false-HAL-true,3-MX_DMA_Init-DMA-false-HAL-true,4-MX_FDCAN1_Init-FDCAN1-false-HAL-true,5-MX_FDCAN2_Init-FDCAN2-false-HAL-true,6-MX_I2C4_Init-I2C4-false-HAL-true,7-MX_TIM1_Init-TIM1-false-HAL-true,8-MX_UART4_Init-UART4-false-HAL-true,9-MX_UART5_Init-UART5-false-HAL-true,10-MX_UART7_Init-UART7-false-HAL-true,11-MX_USART1_UART_Init-USART1-false-HAL-true,12-MX_USART3_UART_Init-USART3-false-HAL-true,13-MX_USART2_UART_Init-USART2-false-HAL-true,14-MX_USART6_UART_Init-USART6-false-HAL-true,15-MX_TIM8_Init-TIM8-false-HAL-true,16-MX_LWIP_Init-LWIP-false-HAL-false,17-MX_QUADSPI_Init-QUADSPI-false-HAL-true,18-MX_LPUART1_UART_Init-LPUART1-false-HAL-true,19-MX_ADC2_Init-ADC2-false-HAL-true,0-MX_CORTEX_M7_Init-CORTEX_M7-false-HAL-true |
||||
|
QUADSPI.ChipSelectHighTime=QSPI_CS_HIGH_TIME_2_CYCLE |
||||
|
QUADSPI.ClockMode=QSPI_CLOCK_MODE_3 |
||||
|
QUADSPI.ClockPrescaler=4-1 |
||||
|
QUADSPI.FifoThreshold=32 |
||||
|
QUADSPI.FlashSize=23+1 |
||||
|
QUADSPI.IPParameters=ClockPrescaler,FifoThreshold,SampleShifting,FlashSize,ChipSelectHighTime,ClockMode |
||||
|
QUADSPI.SampleShifting=QSPI_SAMPLE_SHIFTING_HALFCYCLE |
||||
|
RCC.ADCFreq_Value=72000000 |
||||
|
RCC.AHB12Freq_Value=200000000 |
||||
|
RCC.AHB4Freq_Value=200000000 |
||||
|
RCC.APB1Freq_Value=100000000 |
||||
|
RCC.APB2Freq_Value=100000000 |
||||
|
RCC.APB3Freq_Value=100000000 |
||||
|
RCC.APB4Freq_Value=100000000 |
||||
|
RCC.AXIClockFreq_Value=200000000 |
||||
|
RCC.CECFreq_Value=32000 |
||||
|
RCC.CKPERFreq_Value=64000000 |
||||
|
RCC.CortexFreq_Value=400000000 |
||||
|
RCC.CpuClockFreq_Value=400000000 |
||||
|
RCC.D1CPREFreq_Value=400000000 |
||||
|
RCC.D1PPRE=RCC_APB3_DIV2 |
||||
|
RCC.D2PPRE1=RCC_APB1_DIV2 |
||||
|
RCC.D2PPRE2=RCC_APB2_DIV2 |
||||
|
RCC.D3PPRE=RCC_APB4_DIV2 |
||||
|
RCC.DFSDMACLkFreq_Value=40000000 |
||||
|
RCC.DFSDMFreq_Value=100000000 |
||||
|
RCC.DIVM1=2 |
||||
|
RCC.DIVM2=25 |
||||
|
RCC.DIVN1=64 |
||||
|
RCC.DIVN2=288 |
||||
|
RCC.DIVP1Freq_Value=400000000 |
||||
|
RCC.DIVP2=4 |
||||
|
RCC.DIVP2Freq_Value=72000000 |
||||
|
RCC.DIVP3Freq_Value=50390625 |
||||
|
RCC.DIVQ1=20 |
||||
|
RCC.DIVQ1Freq_Value=40000000 |
||||
|
RCC.DIVQ2=1 |
||||
|
RCC.DIVQ2Freq_Value=288000000 |
||||
|
RCC.DIVQ3Freq_Value=50390625 |
||||
|
RCC.DIVR1=4 |
||||
|
RCC.DIVR1Freq_Value=200000000 |
||||
|
RCC.DIVR2Freq_Value=144000000 |
||||
|
RCC.DIVR3Freq_Value=50390625 |
||||
|
RCC.EnbaleCSS=true |
||||
|
RCC.FDCANFreq_Value=40000000 |
||||
|
RCC.FMCFreq_Value=200000000 |
||||
|
RCC.FamilyName=M |
||||
|
RCC.HCLK3ClockFreq_Value=200000000 |
||||
|
RCC.HCLKFreq_Value=200000000 |
||||
|
RCC.HPRE=RCC_HCLK_DIV2 |
||||
|
RCC.HRTIMFreq_Value=200000000 |
||||
|
RCC.I2C123Freq_Value=100000000 |
||||
|
RCC.I2C4Freq_Value=100000000 |
||||
|
RCC.IPParameters=ADCFreq_Value,AHB12Freq_Value,AHB4Freq_Value,APB1Freq_Value,APB2Freq_Value,APB3Freq_Value,APB4Freq_Value,AXIClockFreq_Value,CECFreq_Value,CKPERFreq_Value,CortexFreq_Value,CpuClockFreq_Value,D1CPREFreq_Value,D1PPRE,D2PPRE1,D2PPRE2,D3PPRE,DFSDMACLkFreq_Value,DFSDMFreq_Value,DIVM1,DIVM2,DIVN1,DIVN2,DIVP1Freq_Value,DIVP2,DIVP2Freq_Value,DIVP3Freq_Value,DIVQ1,DIVQ1Freq_Value,DIVQ2,DIVQ2Freq_Value,DIVQ3Freq_Value,DIVR1,DIVR1Freq_Value,DIVR2Freq_Value,DIVR3Freq_Value,EnbaleCSS,FDCANFreq_Value,FMCFreq_Value,FamilyName,HCLK3ClockFreq_Value,HCLKFreq_Value,HPRE,HRTIMFreq_Value,I2C123Freq_Value,I2C4Freq_Value,LPTIM1Freq_Value,LPTIM2Freq_Value,LPTIM345Freq_Value,LPUART1Freq_Value,LTDCFreq_Value,MCO1PinFreq_Value,MCO2PinFreq_Value,PLL1_VCI_Range-AdvancedSettings,PLL2FRACN,PLL2_VCI_Range-AdvancedSettings,PLL3_VCI_Range-AdvancedSettings,PLLFRACN,PLLSourceVirtual,QSPIFreq_Value,RNGFreq_Value,RTCFreq_Value,SAI1Freq_Value,SAI23Freq_Value,SAI4AFreq_Value,SAI4BFreq_Value,SDMMCFreq_Value,SPDIFRXFreq_Value,SPI123Freq_Value,SPI45Freq_Value,SPI6Freq_Value,SWPMI1Freq_Value,SYSCLKFreq_VALUE,SYSCLKSource,Tim1OutputFreq_Value,Tim2OutputFreq_Value,TraceFreq_Value,USART16Freq_Value,USART234578Freq_Value,USBFreq_Value,VCO1OutputFreq_Value,VCO2OutputFreq_Value,VCO3OutputFreq_Value,VCOInput1Freq_Value,VCOInput2Freq_Value,VCOInput3Freq_Value |
||||
|
RCC.LPTIM1Freq_Value=100000000 |
||||
|
RCC.LPTIM2Freq_Value=100000000 |
||||
|
RCC.LPTIM345Freq_Value=100000000 |
||||
|
RCC.LPUART1Freq_Value=100000000 |
||||
|
RCC.LTDCFreq_Value=50390625 |
||||
|
RCC.MCO1PinFreq_Value=64000000 |
||||
|
RCC.MCO2PinFreq_Value=400000000 |
||||
|
RCC.PLL1_VCI_Range-AdvancedSettings=RCC_PLL1VCIRANGE_3 |
||||
|
RCC.PLL2FRACN=0 |
||||
|
RCC.PLL2_VCI_Range-AdvancedSettings=RCC_PLL2VCIRANGE_0 |
||||
|
RCC.PLL3_VCI_Range-AdvancedSettings=RCC_PLL3VCIRANGE_3 |
||||
|
RCC.PLLFRACN=0 |
||||
|
RCC.PLLSourceVirtual=RCC_PLLSOURCE_HSE |
||||
|
RCC.QSPIFreq_Value=200000000 |
||||
|
RCC.RNGFreq_Value=48000000 |
||||
|
RCC.RTCFreq_Value=32000 |
||||
|
RCC.SAI1Freq_Value=40000000 |
||||
|
RCC.SAI23Freq_Value=40000000 |
||||
|
RCC.SAI4AFreq_Value=40000000 |
||||
|
RCC.SAI4BFreq_Value=40000000 |
||||
|
RCC.SDMMCFreq_Value=40000000 |
||||
|
RCC.SPDIFRXFreq_Value=40000000 |
||||
|
RCC.SPI123Freq_Value=40000000 |
||||
|
RCC.SPI45Freq_Value=100000000 |
||||
|
RCC.SPI6Freq_Value=100000000 |
||||
|
RCC.SWPMI1Freq_Value=100000000 |
||||
|
RCC.SYSCLKFreq_VALUE=400000000 |
||||
|
RCC.SYSCLKSource=RCC_SYSCLKSOURCE_PLLCLK |
||||
|
RCC.Tim1OutputFreq_Value=200000000 |
||||
|
RCC.Tim2OutputFreq_Value=200000000 |
||||
|
RCC.TraceFreq_Value=200000000 |
||||
|
RCC.USART16Freq_Value=100000000 |
||||
|
RCC.USART234578Freq_Value=100000000 |
||||
|
RCC.USBFreq_Value=40000000 |
||||
|
RCC.VCO1OutputFreq_Value=800000000 |
||||
|
RCC.VCO2OutputFreq_Value=288000000 |
||||
|
RCC.VCO3OutputFreq_Value=100781250 |
||||
|
RCC.VCOInput1Freq_Value=12500000 |
||||
|
RCC.VCOInput2Freq_Value=1000000 |
||||
|
RCC.VCOInput3Freq_Value=781250 |
||||
|
SH.ADCx_INP5.0=ADC2_INP5,IN5-Single-Ended |
||||
|
SH.ADCx_INP5.ConfNb=1 |
||||
|
SH.GPXTI1.0=GPIO_EXTI1 |
||||
|
SH.GPXTI1.ConfNb=1 |
||||
|
SH.GPXTI14.0=GPIO_EXTI14 |
||||
|
SH.GPXTI14.ConfNb=1 |
||||
|
SH.GPXTI4.0=GPIO_EXTI4 |
||||
|
SH.GPXTI4.ConfNb=1 |
||||
|
TIM1.AutoReloadPreload=TIM_AUTORELOAD_PRELOAD_ENABLE |
||||
|
TIM1.IPParameters=Prescaler,Period,AutoReloadPreload |
||||
|
TIM1.Period=10000-1 |
||||
|
TIM1.Prescaler=2000-1 |
||||
|
TIM8.IPParameters=Prescaler,Period |
||||
|
TIM8.Period=200-1 |
||||
|
TIM8.Prescaler=2000-1 |
||||
|
UART4.BaudRate=57600 |
||||
|
UART4.IPParameters=OverrunDisableParam,BaudRate |
||||
|
UART4.OverrunDisableParam=UART_ADVFEATURE_OVERRUN_ENABLE |
||||
|
UART5.BaudRate=100000 |
||||
|
UART5.DMADisableonRxErrorParam=UART_ADVFEATURE_DMA_DISABLEONRXERROR |
||||
|
UART5.IPParameters=BaudRate,WordLength,Parity,OverrunDisableParam,DMADisableonRxErrorParam |
||||
|
UART5.OverrunDisableParam=UART_ADVFEATURE_OVERRUN_DISABLE |
||||
|
UART5.Parity=PARITY_EVEN |
||||
|
UART5.WordLength=WORDLENGTH_9B |
||||
|
UART7.BaudRate=9600 |
||||
|
UART7.DMADisableonRxErrorParam=UART_ADVFEATURE_DMA_DISABLEONRXERROR |
||||
|
UART7.IPParameters=OverrunDisableParam,BaudRate,DMADisableonRxErrorParam |
||||
|
UART7.OverrunDisableParam=UART_ADVFEATURE_OVERRUN_DISABLE |
||||
|
USART1.BaudRate=115200 |
||||
|
USART1.DMADisableonRxErrorParam=ADVFEATURE_DMA_DISABLEONRXERROR |
||||
|
USART1.IPParameters=VirtualMode-Asynchronous,OverrunDisableParam,DMADisableonRxErrorParam,BaudRate |
||||
|
USART1.OverrunDisableParam=ADVFEATURE_OVERRUN_DISABLE |
||||
|
USART1.VirtualMode-Asynchronous=VM_ASYNC |
||||
|
USART2.BaudRate=57600 |
||||
|
USART2.DMADisableonRxErrorParam=ADVFEATURE_DMA_DISABLEONRXERROR |
||||
|
USART2.IPParameters=VirtualMode-Asynchronous,OverrunDisableParam,DMADisableonRxErrorParam,BaudRate |
||||
|
USART2.OverrunDisableParam=ADVFEATURE_OVERRUN_DISABLE |
||||
|
USART2.VirtualMode-Asynchronous=VM_ASYNC |
||||
|
USART3.BaudRate=9600 |
||||
|
USART3.DMADisableonRxErrorParam=ADVFEATURE_DMA_DISABLEONRXERROR |
||||
|
USART3.FIFOMode=FIFOMODE_ENABLE |
||||
|
USART3.IPParameters=VirtualMode-Asynchronous,DMADisableonRxErrorParam,OverrunDisableParam,FIFOMode,BaudRate |
||||
|
USART3.OverrunDisableParam=ADVFEATURE_OVERRUN_DISABLE |
||||
|
USART3.VirtualMode-Asynchronous=VM_ASYNC |
||||
|
USART6.BaudRate=115200 |
||||
|
USART6.DMADisableonRxErrorParam=ADVFEATURE_DMA_ENABLEONRXERROR |
||||
|
USART6.FIFOMode=FIFOMODE_ENABLE |
||||
|
USART6.IPParameters=VirtualMode,OverrunDisableParam,FIFOMode,DMADisableonRxErrorParam,BaudRate,SwapParam |
||||
|
USART6.OverrunDisableParam=ADVFEATURE_OVERRUN_DISABLE |
||||
|
USART6.SwapParam=ADVFEATURE_SWAP_DISABLE |
||||
|
USART6.VirtualMode=VM_ASYNC |
||||
|
VP_LWIP_VS_Enabled.Mode=Enabled |
||||
|
VP_LWIP_VS_Enabled.Signal=LWIP_VS_Enabled |
||||
|
VP_SYS_VS_Systick.Mode=SysTick |
||||
|
VP_SYS_VS_Systick.Signal=SYS_VS_Systick |
||||
|
VP_TIM1_VS_ClockSourceINT.Mode=Internal |
||||
|
VP_TIM1_VS_ClockSourceINT.Signal=TIM1_VS_ClockSourceINT |
||||
|
VP_TIM8_VS_ClockSourceINT.Mode=Internal |
||||
|
VP_TIM8_VS_ClockSourceINT.Signal=TIM8_VS_ClockSourceINT |
||||
|
board=custom |
||||
|
isbadioc=false |
||||
@ -0,0 +1,83 @@ |
|||||
|
<?xml version="1.0" encoding="UTF-8" standalone="no"?> |
||||
|
<launchConfiguration type="com.st.stm32cube.ide.mcu.debug.launch.launchConfigurationType"> |
||||
|
<stringAttribute key="com.st.stm32cube.ide.mcu.debug.launch.access_port_id" value="0"/> |
||||
|
<stringAttribute key="com.st.stm32cube.ide.mcu.debug.launch.cubeprog_external_loaders" value="[]"/> |
||||
|
<stringAttribute key="com.st.stm32cube.ide.mcu.debug.launch.debug_auth_certif_path" value=""/> |
||||
|
<booleanAttribute key="com.st.stm32cube.ide.mcu.debug.launch.debug_auth_check_enable" value="false"/> |
||||
|
<stringAttribute key="com.st.stm32cube.ide.mcu.debug.launch.debug_auth_key_path" value=""/> |
||||
|
<stringAttribute key="com.st.stm32cube.ide.mcu.debug.launch.debug_auth_permission" value=""/> |
||||
|
<booleanAttribute key="com.st.stm32cube.ide.mcu.debug.launch.enable_live_expr" value="true"/> |
||||
|
<booleanAttribute key="com.st.stm32cube.ide.mcu.debug.launch.enable_swv" value="false"/> |
||||
|
<intAttribute key="com.st.stm32cube.ide.mcu.debug.launch.formatVersion" value="2"/> |
||||
|
<stringAttribute key="com.st.stm32cube.ide.mcu.debug.launch.ip_address_local" value="localhost"/> |
||||
|
<booleanAttribute key="com.st.stm32cube.ide.mcu.debug.launch.limit_swo_clock.enabled" value="false"/> |
||||
|
<stringAttribute key="com.st.stm32cube.ide.mcu.debug.launch.limit_swo_clock.value" value=""/> |
||||
|
<stringAttribute key="com.st.stm32cube.ide.mcu.debug.launch.loadList" value="{"fItems":[{"fIsFromMainTab":true,"fPath":"Debug/BHBF_NewFiveWheel3.0.elf","fProjectName":"BHBF_NewFiveWheel3.0","fPerformBuild":true,"fDownload":true,"fLoadSymbols":true}]}"/> |
||||
|
<stringAttribute key="com.st.stm32cube.ide.mcu.debug.launch.override_start_address_mode" value="default"/> |
||||
|
<stringAttribute key="com.st.stm32cube.ide.mcu.debug.launch.remoteCommand" value="target remote"/> |
||||
|
<booleanAttribute key="com.st.stm32cube.ide.mcu.debug.launch.startServer" value="true"/> |
||||
|
<booleanAttribute key="com.st.stm32cube.ide.mcu.debug.launch.startuptab.exception.divby0" value="true"/> |
||||
|
<booleanAttribute key="com.st.stm32cube.ide.mcu.debug.launch.startuptab.exception.unaligned" value="false"/> |
||||
|
<booleanAttribute key="com.st.stm32cube.ide.mcu.debug.launch.startuptab.haltonexception" value="true"/> |
||||
|
<booleanAttribute key="com.st.stm32cube.ide.mcu.debug.launch.swd_mode" value="true"/> |
||||
|
<stringAttribute key="com.st.stm32cube.ide.mcu.debug.launch.swv_port" value="61235"/> |
||||
|
<stringAttribute key="com.st.stm32cube.ide.mcu.debug.launch.swv_trace_hclk" value="200000000"/> |
||||
|
<booleanAttribute key="com.st.stm32cube.ide.mcu.debug.launch.useRemoteTarget" value="true"/> |
||||
|
<stringAttribute key="com.st.stm32cube.ide.mcu.debug.launch.vector_table" value=""/> |
||||
|
<booleanAttribute key="com.st.stm32cube.ide.mcu.debug.launch.verify_flash_download" value="true"/> |
||||
|
<booleanAttribute key="com.st.stm32cube.ide.mcu.debug.stlink.cti_allow_halt" value="false"/> |
||||
|
<booleanAttribute key="com.st.stm32cube.ide.mcu.debug.stlink.cti_signal_halt" value="false"/> |
||||
|
<booleanAttribute key="com.st.stm32cube.ide.mcu.debug.stlink.enable_logging" value="false"/> |
||||
|
<booleanAttribute key="com.st.stm32cube.ide.mcu.debug.stlink.enable_max_halt_delay" value="false"/> |
||||
|
<booleanAttribute key="com.st.stm32cube.ide.mcu.debug.stlink.enable_shared_stlink" value="false"/> |
||||
|
<stringAttribute key="com.st.stm32cube.ide.mcu.debug.stlink.frequency" value="0"/> |
||||
|
<booleanAttribute key="com.st.stm32cube.ide.mcu.debug.stlink.halt_all_on_reset" value="false"/> |
||||
|
<stringAttribute key="com.st.stm32cube.ide.mcu.debug.stlink.log_file" value="F:\BHBF\cubeide\ProjecFile\BHBF_NewFiveWheel3.0\Debug\st-link_gdbserver_log.txt"/> |
||||
|
<stringAttribute key="com.st.stm32cube.ide.mcu.debug.stlink.low_power_debug" value="enable"/> |
||||
|
<stringAttribute key="com.st.stm32cube.ide.mcu.debug.stlink.max_halt_delay" value="2"/> |
||||
|
<stringAttribute key="com.st.stm32cube.ide.mcu.debug.stlink.reset_strategy" value="connect_under_reset"/> |
||||
|
<booleanAttribute key="com.st.stm32cube.ide.mcu.debug.stlink.stlink_check_serial_number" value="false"/> |
||||
|
<stringAttribute key="com.st.stm32cube.ide.mcu.debug.stlink.stlink_txt_serial_number" value=""/> |
||||
|
<stringAttribute key="com.st.stm32cube.ide.mcu.debug.stlink.watchdog_config" value="none"/> |
||||
|
<booleanAttribute key="com.st.stm32cube.ide.mcu.debug.stlinkenable_rtos" value="false"/> |
||||
|
<stringAttribute key="com.st.stm32cube.ide.mcu.debug.stlinkrestart_configurations" value="{"fVersion":1,"fItems":[{"fDisplayName":"Reset","fIsSuppressible":false,"fResetAttribute":"Software system reset","fResetStrategies":[{"fDisplayName":"Software system reset","fLaunchAttribute":"system_reset","fGdbCommands":["monitor reset\r\n"],"fCmdOptions":["-g"]},{"fDisplayName":"Hardware reset","fLaunchAttribute":"hardware_reset","fGdbCommands":["monitor reset hardware\r\n"],"fCmdOptions":["-g"]},{"fDisplayName":"Core reset","fLaunchAttribute":"core_reset","fGdbCommands":["monitor reset core\r\n"],"fCmdOptions":["-g"]},{"fDisplayName":"None","fLaunchAttribute":"no_reset","fGdbCommands":[],"fCmdOptions":["-g"]}],"fGdbCommandGroup":{"name":"Additional commands","commands":[]},"fStartApplication":true}]}"/> |
||||
|
<booleanAttribute key="com.st.stm32cube.ide.mcu.rtosproxy.enableRtosProxy" value="false"/> |
||||
|
<stringAttribute key="com.st.stm32cube.ide.mcu.rtosproxy.rtosProxyCustomProperties" value=""/> |
||||
|
<stringAttribute key="com.st.stm32cube.ide.mcu.rtosproxy.rtosProxyDriver" value="threadx"/> |
||||
|
<booleanAttribute key="com.st.stm32cube.ide.mcu.rtosproxy.rtosProxyDriverAuto" value="false"/> |
||||
|
<stringAttribute key="com.st.stm32cube.ide.mcu.rtosproxy.rtosProxyDriverPort" value="cortex_m0"/> |
||||
|
<intAttribute key="com.st.stm32cube.ide.mcu.rtosproxy.rtosProxyPort" value="60000"/> |
||||
|
<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.doHalt" value="false"/> |
||||
|
<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.doReset" value="false"/> |
||||
|
<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.initCommands" value=""/> |
||||
|
<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.ipAddress" value="localhost"/> |
||||
|
<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.jtagDeviceId" value="com.st.stm32cube.ide.mcu.debug.stlink"/> |
||||
|
<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.pcRegister" value=""/> |
||||
|
<intAttribute key="org.eclipse.cdt.debug.gdbjtag.core.portNumber" value="61234"/> |
||||
|
<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.runCommands" value=""/> |
||||
|
<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setPcRegister" value="false"/> |
||||
|
<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setResume" value="true"/> |
||||
|
<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setStopAt" value="true"/> |
||||
|
<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.stopAt" value="main"/> |
||||
|
<stringAttribute key="org.eclipse.cdt.dsf.gdb.DEBUG_NAME" value="arm-none-eabi-gdb"/> |
||||
|
<booleanAttribute key="org.eclipse.cdt.dsf.gdb.NON_STOP" value="false"/> |
||||
|
<booleanAttribute key="org.eclipse.cdt.dsf.gdb.UPDATE_THREADLIST_ON_SUSPEND" value="false"/> |
||||
|
<intAttribute key="org.eclipse.cdt.launch.ATTR_BUILD_BEFORE_LAUNCH_ATTR" value="2"/> |
||||
|
<stringAttribute key="org.eclipse.cdt.launch.COREFILE_PATH" value=""/> |
||||
|
<stringAttribute key="org.eclipse.cdt.launch.DEBUGGER_START_MODE" value="remote"/> |
||||
|
<booleanAttribute key="org.eclipse.cdt.launch.DEBUGGER_STOP_AT_MAIN" value="true"/> |
||||
|
<stringAttribute key="org.eclipse.cdt.launch.DEBUGGER_STOP_AT_MAIN_SYMBOL" value="main"/> |
||||
|
<stringAttribute key="org.eclipse.cdt.launch.PROGRAM_NAME" value="Debug/BHBF_NewFiveWheel3.0.elf"/> |
||||
|
<stringAttribute key="org.eclipse.cdt.launch.PROJECT_ATTR" value="BHBF_NewFiveWheel3.0"/> |
||||
|
<booleanAttribute key="org.eclipse.cdt.launch.PROJECT_BUILD_CONFIG_AUTO_ATTR" value="true"/> |
||||
|
<stringAttribute key="org.eclipse.cdt.launch.PROJECT_BUILD_CONFIG_ID_ATTR" value="com.st.stm32cube.ide.mcu.gnu.managedbuild.config.exe.debug.1900810912"/> |
||||
|
<booleanAttribute key="org.eclipse.debug.core.ATTR_FORCE_SYSTEM_CONSOLE_ENCODING" value="false"/> |
||||
|
<listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_PATHS"> |
||||
|
<listEntry value="/BHBF_NewFiveWheel3.0"/> |
||||
|
</listAttribute> |
||||
|
<listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_TYPES"> |
||||
|
<listEntry value="4"/> |
||||
|
</listAttribute> |
||||
|
<stringAttribute key="org.eclipse.dsf.launch.MEMORY_BLOCKS" value="<?xml version="1.0" encoding="UTF-8" standalone="no"?><memoryBlockExpressionList context="reserved-for-future-use"/>"/> |
||||
|
<stringAttribute key="process_factory_id" value="com.st.stm32cube.ide.mcu.debug.launch.HardwareDebugProcessFactory"/> |
||||
|
</launchConfiguration> |
||||
@ -0,0 +1,159 @@ |
|||||
|
--分窗标志定义 |
||||
|
WIN_0 = 0x0001 |
||||
|
WIN_1 = 0x0002 |
||||
|
WIN_2 = 0x0004 |
||||
|
WIN_3 = 0x0008 |
||||
|
WIN_4 = 0x0010 |
||||
|
WIN_5 = 0x0020 |
||||
|
WIN_6 = 0x0040 |
||||
|
WIN_7 = 0x0080 |
||||
|
WIN_8 = 0x0100 |
||||
|
WIN_9 = 0x0200 |
||||
|
WIN_10 = 0x0400 |
||||
|
WIN_11 = 0x0800 |
||||
|
WIN_12 = 0x1000 |
||||
|
WIN_13 = 0x2000 |
||||
|
WIN_14 = 0x4000 |
||||
|
WIN_15 = 0x8000 |
||||
|
|
||||
|
|
||||
|
--GV索引字符串 |
||||
|
local GVstr = { |
||||
|
"State_Index_U", |
||||
|
"State_Index_U_Elapse", |
||||
|
"State_Index_N", |
||||
|
"State_Index_N_Elapse", |
||||
|
"NC_ARRAY_u8_0", |
||||
|
"NC_ARRAY_u8_01", |
||||
|
"NC_ARRAY_u8_1", |
||||
|
"NC_ARRAY_u8_11", |
||||
|
"NC_ARRAY_u8_2", |
||||
|
"MK32_Key.RxIndex", |
||||
|
"MK32_Key.CH0_RY_H", |
||||
|
"MK32_Key.CH1_RY_V", |
||||
|
"MK32_Key.CH2_LY_V", |
||||
|
"MK32_Key.CH3_LY_H", |
||||
|
"MK32_Key.CH4_SA", |
||||
|
"MK32_Key.CH5_SB", |
||||
|
"MK32_Key.CH6_SC", |
||||
|
"MK32_Key.CH7_SD", |
||||
|
"MK32_Key.CH8_SE", |
||||
|
"MK32_Key.CH9_SF", |
||||
|
"MK32_Key.CH10_LD1", |
||||
|
"MK32_Key.CH11_RD1", |
||||
|
"MK32_Key.CH12_S1", |
||||
|
"MK32_Key.CH13_S2", |
||||
|
"MK32_Key.CH14_LT", |
||||
|
"MK32_Key.CH15_RT", |
||||
|
"MK32_Key.IsOnline", |
||||
|
"Motor_P[0]MotorID", |
||||
|
"Motor_P[0]RxIndex", |
||||
|
"Motor_P[0]Run_Mode", |
||||
|
"Motor_P[0]Current", |
||||
|
"Motor_P[0]Target_Current", |
||||
|
"Motor_P[0]Velcity", |
||||
|
"Motor_P[0]Target_Velcity", |
||||
|
"Motor_P[0]Position", |
||||
|
"Motor_P[0]Target_Position", |
||||
|
"Motor_P[0]ERROR_Flag", |
||||
|
"Motor_P[0]Temperature_Motor", |
||||
|
"Motor_P[0]Temperature_PCB", |
||||
|
"Motor_P[1]MotorID", |
||||
|
"Motor_P[1]RxIndex", |
||||
|
"Motor_P[1]Run_Mode", |
||||
|
"Motor_P[1]Current", |
||||
|
"Motor_P[1]Target_Current", |
||||
|
"Motor_P[1]Velcity", |
||||
|
"Motor_P[1]Target_Velcity", |
||||
|
"Motor_P[1]Position", |
||||
|
"Motor_P[1]Target_Position", |
||||
|
"Motor_P[1]ERROR_Flag", |
||||
|
"Motor_P[1]Temperature_Motor", |
||||
|
"Motor_P[1]Temperature_PCB", |
||||
|
"Motor_P[2]MotorID", |
||||
|
"Motor_P[2]RxIndex", |
||||
|
"Motor_P[2]Run_Mode", |
||||
|
"Motor_P[2]Current", |
||||
|
"Motor_P[2]Target_Current", |
||||
|
"Motor_P[2]Velcity", |
||||
|
"Motor_P[2]Target_Velcity", |
||||
|
"Motor_P[2]Position", |
||||
|
"Motor_P[2]Target_Position", |
||||
|
"Motor_P[2]ERROR_Flag", |
||||
|
"Motor_P[2]Temperature_Motor", |
||||
|
"Motor_P[2]Temperature_PCB" |
||||
|
} |
||||
|
|
||||
|
--CAN 解码函数，返回的字符串将展示到数据窗口 |
||||
|
--id 帧ID |
||||
|
--std_ext 0表示标准帧, 1表示扩展帧 |
||||
|
--data_remote 0表示数据帧, 1表示远程帧 |
||||
|
--datalen 数据长度，字节 |
||||
|
--data_bin 二进制数据 |
||||
|
--函数返回: ret1解码字符串 , ret2分窗控制字, 波形数据字符串 |
||||
|
function can_decoder(id, std_ext, data_remote, datalen, data_bin) |
||||
|
local ret1 = "" --返回值1 解码显示结果 |
||||
|
local ret2 = 0 --返回值2 分窗标志 |
||||
|
local bin = {} |
||||
|
local i |
||||
|
local str_wave = "" |
||||
|
|
||||
|
local _index = 0 |
||||
|
local _value = 0 |
||||
|
--local a_string = string.pack(">i2", your_integer) |
||||
|
--local an_integer = string.unpack(">i2", a_string, start) 将二进制字符串转换为数字类型，从第start个字符开始，<小端 >大端，类型i2，长度2 |
||||
|
|
||||
|
--#将字符串转换到整数数组存放 |
||||
|
for i = 1,#data_bin,1 do |
||||
|
bin[i] = tonumber(string.byte(data_bin, i,i)) |
||||
|
end |
||||
|
|
||||
|
--计算解码结果,将显示在数据包后面 |
||||
|
if (id == 0x120) then |
||||
|
_index = string.unpack("<i2", data_bin, 1) |
||||
|
_value = string.unpack("<i4", data_bin, 3) |
||||
|
ret1 = string.format("设置CV：Index %d = %d", _index, _value) |
||||
|
elseif (id == 0x121) then |
||||
|
_index = string.unpack("<i2", data_bin, 1) |
||||
|
ret1 = string.format("请求CV：Index %d", _index, _value) |
||||
|
elseif (id == 0x122) then |
||||
|
_index = string.unpack("<i2", data_bin, 1) |
||||
|
_value = string.unpack("<i4", data_bin, 3) |
||||
|
ret1 = string.format("读取CV：Index %d = %d", _index, _value) |
||||
|
elseif (id == 0x1FF) then |
||||
|
if(datalen == 1) then |
||||
|
ret1 = string.format("## Boot程序启动") |
||||
|
elseif (datalen == 3) then |
||||
|
ret1 = string.format("## Boot启动APP") |
||||
|
elseif (datalen == 2) then |
||||
|
ret1 = string.format("## 进入刷写模式") |
||||
|
elseif (datalen == 4) then |
||||
|
ret1 = string.format("## 刷写错误") |
||||
|
elseif (datalen == 5) then |
||||
|
ret1 = string.format("## APP程序启动") |
||||
|
end |
||||
|
elseif (id == 0x110) then |
||||
|
if(data_bin[1]==0x55) then |
||||
|
ret1 = string.format("## 请求重启系统") |
||||
|
end |
||||
|
elseif (id == 0x130) then |
||||
|
_index = string.unpack("<i2", data_bin, 1) |
||||
|
_value = string.unpack("<i2", data_bin, 3) |
||||
|
ret1 = string.format("请求GV.%d,%s, Length = %d", _index, GVstr[_index+1],_value) |
||||
|
elseif (id == 0x132) then |
||||
|
_index = string.unpack("<i2", data_bin, 1) |
||||
|
_value = string.unpack("<i4", data_bin, 3) |
||||
|
ret1 = string.format("______读取GV.%d,%s = %d", _index, GVstr[_index+1],_value) |
||||
|
end |
||||
|
|
||||
|
--计算分窗标志, 决定数据包同步显示到哪些子窗口 |
||||
|
if (id == 0x120 or id == 0x121 or id == 0x122) then |
||||
|
ret2 = ret2 | WIN_0 |
||||
|
elseif (id == 0x1FF or id == 0x110) then |
||||
|
ret2 = ret2 | WIN_1 |
||||
|
elseif (id == 0x130 or id == 0x132) then |
||||
|
ret2 = ret2 | WIN_2 |
||||
|
end |
||||
|
|
||||
|
return ret1, ret2, str_wave |
||||
|
end |
||||
@ -0,0 +1,90 @@ |
|||||
|
------------------------------------------------------- |
||||
|
-- 设置CV的值 |
||||
|
------------------------------------------------------- |
||||
|
local CV_Index = 0 |
||||
|
local CV_value = -2 |
||||
|
|
||||
|
|
||||
|
local str |
||||
|
local can_id = 0x120 |
||||
|
local byte0 = 0x00 |
||||
|
local byte1 = 0x00 |
||||
|
local byte2 = 0x00 |
||||
|
local byte3 = 0x00 |
||||
|
local byte4 = 0x00 |
||||
|
local byte5 = 0x00 |
||||
|
local byte6 = 0x00 |
||||
|
local byte7 = 0x00 |
||||
|
|
||||
|
print("设置CV的值") |
||||
|
can_bus("open", 0, 8, 500000, 500000) |
||||
|
|
||||
|
byte0 = ((CV_Index >> 0) & 0xFF) |
||||
|
byte1 = ((CV_Index >> 8) & 0xFF) |
||||
|
|
||||
|
byte2 = ((CV_value >> 0) & 0xFF) |
||||
|
byte3 = ((CV_value >> 8) & 0xFF) |
||||
|
byte4 = ((CV_value >> 16) & 0xFF) |
||||
|
byte5 = ((CV_value >> 24) & 0xFF) |
||||
|
|
||||
|
str= string.format("%c%c%c%c%c%c%c%c", byte0, byte1, byte2, byte3, byte4, byte5, byte6, byte7) |
||||
|
|
||||
|
can_bus("send", 0, 0, can_id, str) |
||||
|
------------------------------------------------------- |
||||
|
-- 读取CV的值 |
||||
|
------------------------------------------------------- |
||||
|
local CV_Index = 0 |
||||
|
|
||||
|
local str |
||||
|
local can_id = 0x121 |
||||
|
local byte0 = 0x00 |
||||
|
local byte1 = 0x00 |
||||
|
local byte2 = 0x00 |
||||
|
local byte3 = 0x00 |
||||
|
local byte4 = 0x00 |
||||
|
local byte5 = 0x00 |
||||
|
local byte6 = 0x00 |
||||
|
local byte7 = 0x00 |
||||
|
|
||||
|
print("读取CV的值") |
||||
|
can_bus("open", 0, 8, 500000, 500000) |
||||
|
|
||||
|
byte0 = ((CV_Index >> 0) & 0xFF) |
||||
|
byte1 = ((CV_Index >> 8) & 0xFF) |
||||
|
|
||||
|
str= string.format("%c%c%c%c%c%c%c%c", byte0, byte1, byte2, byte3, byte4, byte5, byte6, byte7) |
||||
|
|
||||
|
can_bus("send", 0, 0, can_id, str) |
||||
|
|
||||
|
------------------------------------------------------- |
||||
|
-- 读取GV |
||||
|
------------------------------------------------------- |
||||
|
local GV_Index = 0 |
||||
|
local GV_Length = 1 |
||||
|
local GV_config = 1 |
||||
|
|
||||
|
local str |
||||
|
local can_id = 0x130 |
||||
|
local byte0 = 0x00 |
||||
|
local byte1 = 0x00 |
||||
|
local byte2 = 0x00 |
||||
|
local byte3 = 0x00 |
||||
|
local byte4 = 0x00 |
||||
|
local byte5 = 0x00 |
||||
|
local byte6 = 0x00 |
||||
|
local byte7 = 0x00 |
||||
|
|
||||
|
print("读取GV的值") |
||||
|
can_bus("open", 0, 8, 500000, 500000) |
||||
|
|
||||
|
byte0 = ((GV_Index >> 0) & 0xFF) |
||||
|
byte1 = ((GV_Index >> 8) & 0xFF) |
||||
|
|
||||
|
byte2 = ((GV_Length >> 0) & 0xFF) |
||||
|
byte3 = ((GV_Length >> 8) & 0xFF) |
||||
|
|
||||
|
byte4 = ((GV_config >> 0) & 0xFF) |
||||
|
|
||||
|
str= string.format("%c%c%c%c%c%c%c%c", byte0, byte1, byte2, byte3, byte4, byte5, byte6, byte7) |
||||
|
|
||||
|
can_bus("send", 0, 0, can_id, str) |
||||
@ -0,0 +1,5 @@ |
|||||
|
proto-generator-bin\protoc --nanopb_out=. Protobuf\student.proto |
||||
|
proto-generator-bin\protoc --nanopb_out=. Protobuf\*.proto |
||||
|
|
||||
|
|
||||
|
..\proto-generator-bin\protoc --nanopb_out=. *.proto |
||||
Loading…
Reference in new issue